Item | Motion Control Coupling |
Shaft Locking Type - Couplings | 1 Piece Clamp |
System of Measurement | Metric |
Bore Dia. | 11mm x 7mm |
Material - Couplings | Aluminum |
Outside Dia. | 28.6 mm |
Overall Length | 38.1 mm |
Finish | Bright |
Outside Dia. (mm) | 28.6 mm |
Style | 4-Beam Clamp |
Length through Bore | 17.02 mm |
Outside Dia. (In.) | 1.125 |
Overall Length (mm) | 38.1 |
Overall Length (In.) | 1.5 |
Size | PCMR29 |
Screw Size (mm) | M4 |
Max. Axial Misalignment (In.) | +/-0.01 |
Screw Size | M4 |
Min. Bore (mm) | 7 |
Max. RPM | 6,000 RPM |
Max. Temp. | 225 Degrees F |
Max. Bore (mm) | 11 mm |
Item - Motion Control Couplings | Motion Control Coupling |
Torsional Stiffness (Deg./In.-Lbs.) | 0.221 |
Max. Parallel Misalignment (In.) | 0.015 in |
Length through Bore (mm) | 17.02 |
Clearance Dia. (In.) | 0.625 in |
Rated Torque | 34 in-lb |
Max. Temp. Range (F) | 225 Degrees |
Max. Angular Misalignment | 3 Degrees |
Clearance Dia. (mm) | 12.7 |
Screw Type | Cap Screw |
Torque (In.-Lbs.) | 34 |
Length through Bore (In.) | 0.67 |
Material | Aluminum |
Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant |
Application | Light-Duty Power Transmission, Servo Motors to Lead Screws |
Screw Material | Alloy Steel |
Bore Tolerance | +0.025/-0.000 mm |
Maximum Speed | 6,000 RPM |
Moment of Inertia | 0.000006349 kgf/m sq |
Shaft Locking Type | Clamp On |
For Misalignment Type | Angular, Axial, Parallel |
Features | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash |
Axial Motion | 0.25 mm |
Parallel Misalignment | 0.38 mm |
Different Bore Sizes | Yes |
Dynamic Torque Non-Reversing | 1.92 N-m |
Bore Diameter 2 | 7 mm |
Maximum Torque | 3.84 N-m |
Length Through Bore 2 | 17.6 mm |
Included Screws | (2) Hex Socket Cap Screw |
Shaft Tolerance | +0.000/-0.013 mm |
Coupling Outside Diameter | 28.6 mm |
Bore Diameter 1 | 11 mm |
Screw Thread Size | M4 |
Coupling Material Finish | Bright |
Screw Material Finish | Black Oxide |
Angular Misalignment | 3 Degrees |
Series | PCMR |
Number of Locking Screws | 2 |
Fastener Tightening Torque | 4.6 N-m |
For Environment | Angular Misalignment, Axial Motion, Parallel Misalignment |
Dynamic Torque Reversing | 0.96 N-m |
Minimum Operating Temperature | -40 Degrees C |
Number of Beams | 4 |
Zero Backlash | Yes |
Length Through Bore 1 | 17.6 mm |
Bore Type | Round |
Coupling Material | Aluminum |
Full Bearing Support Required | Yes |
Torsional Stiffness | 0.51 N-m/Deg |
Maximum Operating Temperature | 107 Degrees C |
Coupling Material Grade | 7075 |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Coupling, 4 Beam Clamp, 11mmx7mm, RULAND, Mfr# PCMR29-11-7-A
$52,29
Free shipping will be applied on orders over $50
Motion Control Coupling, Angular Misalignment 3 Degrees , Bore Diameter 1 11 mm, Bore Diameter 2 7 mm, Coupling Material Aluminum, Coupling Outside Diameter 28.6 mm, Maximum Speed 6,000 RPM, Maximum Torque 3.84 N-m, Axial Motion 0.25 mm, Overall Length 38.1 mm, Parallel Misalignment 0.38 mm, System of Measurement Metric, Different Bore Sizes Yes, Torsional Stiffness 0.51 N-m/Deg, Bore Type Round, Shaft Locking Type Clamp On, Number of Beams 4, Length Through Bore 2 17.6 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$52.29
You must be logged in to post a review.
Reviews
There are no reviews yet.