Item | Cutting Tip |
Gas Service | Liquid Natural Gas |
Tip Size | 3 |
Tip Type | GPP |
Tip Series | HPN |
Steel Thickness | 2 in |
Series | HPN |
MAPP Gas Silver Solder | No |
Oxygen Pressure | 40 to 55 psi |
MAPP Gas Soft Solder | no |
For Use With | Victor(R) Products |
Fuel Pressure | 0.7 psi |
Propane Gas Silver Solder | no |
Silver Solder Tube | no |
Size | 3 |
Propane Gas Silver Braze | no |
MAPP Gas Silver Braze | no |
Type | 2 Piece |
Flame Type | Heavy Preheat |
Propane Gas Soft Solder | no |
Soft Solder Tube Cap. | No |
Application | Hand Use for Scarp, Bevel and Heavy Preheat Uses |
Maximum Cutting Speed | 14 in/min |
Pressure Rating (Fuel) | 5 to 10 psig |
Kerf Width | 0.1 in |
Tip Design | Two Piece |
Compatible Manufacturer | Victor |
Cutting Range | 2 in to 2 1/2 in |
Minimum Cutting Speed | 10 in/min |
Oxygen Flow Rate | 150 to 200 scfh (Cutting) |
For Torch Type | Handheld |
Fuel Flow Rate | 22 to 110 scfh |
Compatible Fuel Type | Natural Gas, Propane |
Pressure Rating (Oxygen) | 40 to 50 psig (Cutting) |
Minimum Cutting Thickness | 2 in |
Fuel Type (per Tip Series) | Propane & Natural Gas |
Maximum Cutting Thickness | 2 1/2 in |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Cutting Tip, size 3, AMERICAN TORCH TIP, Mfr# HPN-3
$20,89
Free shipping will be applied on orders over $50
Cutting Tip, Compatible Fuel Type Natural Gas, Propane, For Torch Type Handheld, Tip Series HPN, Tip Size 3, Tip Design Two Piece, Minimum Cutting Thickness 2 in, Maximum Cutting Thickness 2 1/2 in, Compatible Manufacturer Victor, Application Hand Use for Scarp, Bevel and Heavy Preheat Uses, Flame Type Heavy Preheat, Fuel Flow Rate 22 to 110 scfh, Kerf Width 0.1 in, Maximum Cutting Speed 14 in/min, Minimum Cutting Speed 10 in/min, Oxygen Flow Rate 150 to 200 scfh (Cutting)
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.