| Full Load Amps-Inductive | 150 A |
| Item | IEC Magnetic Contactor |
| Full Load Amps-Resistive | 200 A |
| Action | Non-Reversing |
| Number of Poles | 3 |
| Coil Volts | 208 V AC |
| Reversing | No |
| Height | 4.33 in |
| Width | 4.33 in |
| HP @ 3 Phase - 208V | 40 hp |
| HP @ 3 Phase - 575V | 125 hp |
| Depth | 5.12 in |
| HP @ 3 Phase - 240V | 50 hp |
| Enclosure NEMA Rating | No Enclosure |
| HP @ 3 Phase - 480V | 100 hp |
| Aux. Contact Configuration | 1NO/1NC |
| Hz | 50/60 |
| Auxiliary Contact Form | 1NO/1NC |
| Standards | BV, CCC, CSA, CSA C22.2 No 14, DNV, EN 60947-4-1, EN 60947-5-1, GL, GOST, IEC 60947-4-1, IEC 60947-5-1, LROS, RINA, UKCA, UL 508, UL Listed |
| Series | TeSys Deca |
| NEMA Size | Not Applicable |
| Signalling Circuit Frequency | 25 to 400 Hz |
| Overvoltage Category | CAT III |
| Watts Loss | 3 to 4.5W |
| Features | Built-In Bi-Directional Peak Limiting Diode Suppressor |
| Max. Operating Watts | 40 kW (at 220 to 230V AC 50/60 Hz AC-3), 75 kW (at 380 to 400V AC 50/60 Hz AC-3), 80 kW 415 to (at 440V AC 50/60 Hz AC-3), 90 kW (at 500V AC 50/60 Hz AC-3), 100 kW (at 660 to 690V AC 50/60 Hz AC-3), 75 kW (at 1000V AC 50/60 Hz AC-3), 22 kW (at 400V AC 50/60 Hz AC-4), 40 kW (at 220 to 230V AC 50/60 Hz AC-3e), 75 kW (at 380 to 400V AC 50/60 Hz AC-3e), 80 kW (at 415 to 440V AC 50/60 Hz AC-3e), 90 kW (at 500V AC 50/60 Hz AC-3e), 100 kW (at 660 to 690V AC 50/60 Hz AC-3e), 75 kW (at 1000V AC 50/60 Hz AC-3e) |
| Mechanical Durability | 8 Mcycles |
| Vibration Resistance | 4 G (Contactor Closed), 2 G (Contactor Open) |
| Operating Speed | 1200 cycles per hr |
| Rated Insulation Volts | 600/1000V (Power Circuit), 600/690V (Signalling Circuit) |
| Shock Resistance | 15 G for 11 ms (Contactor Closed), 6 G for 11 ms (Contactor Open) |
| Mounts On | Plate, Rail |
| Rated Making Capacity | 140 A (AC Signalling Circuit), 250 A (DC Signalling Circuit), 1660 A @ 440V (Power Circuit) |
| Rated Short-Time Withstand Current | 250 A (at 40°C for 10 min Power Circuit), 580 A (at 40°C for 1 min Power Circuit), 1200 A (at 40°C for 10 s Power Circuit), 1400 A (at 40°C for 1 s Power Circuit), 100 A (For 1 s Signalling Circuit), 120 A (For 500 ms Signalling Circuit), 140 A (For 100 ms Signalling Circuit) |
| Electrical Durability | 0.85 Mcycles (150 A, AC-3, Less than 440 V), 1 Mcycles (200 A, AC-1, Less than 440 V), 0.85 Mcycles (150 A, AC-3e, Less than 440 V) |
| Fuse Amps | 10 A (Signalling Circuit), 315 A (Type 1 Power Circuit), 250 A (Type 2 Power Circuit) |
| Electrical Connection | Screw Clamp Terminals |
| Switching Current | 5 mA (Signalling Circuit) |
| Hold VA | 2 to 18 VA |
| Inrush VA | 280 to 350 VA |
| Environmental Attributes | Mercury Free, PVC Free, Pollution Degree 3 |
| Includes Protective Cover | Yes |
| Net Weight | 2.5 kg |
| Working Height | Up to 9842.52 ft |
| Operating Time | 20 to 35 ms (Closing), 40 to 75 ms (Opening) |
| Fire Rating | UL 94 V1 |
| Impulse Withstand Voltage | 8 kV |
| Rated Voltage | 1000V AC, 300V DC |
| Control Circuit Voltage Limits | Drop-Out AC: 0.3 to 0.5 Uc (at -40 to 70°C 50/60 Hz), Operational AC: 0.8 to 1.15 Uc (at -40-55°C 50/60 Hz), 1 to 1.15 Uc (at 55-70°C 50/60 Hz) |
| IP Rating | IP20 |
| Rated Breaking Capacity | 1400 A @ 440V |
| Tightening Torque | 1.2 Nm (Control Circuit), 12 Nm (Power Circuit) |
| Application | Motor Control, Resistive Load |
| Max. Temperature | 850°C |
| Switching Voltage | 17 V (Signalling Circuit) |
| Impedance | 0.6 mOhm |
| Non-Overlap Time | 1.5 ms |
| Insulation Resistance Range | Greater Than 10 MOhms (Signalling Circuit) |
| Thermal Amperage | 200 A (at 60°C Power Circuit) |
| Resistance Properties | Fire Resistant, Insulation Resistant |
| Embedded Surge Suppressor | Yes |
| Phase | Three |
| Terminal Connection Type | Screw Clamp Terminals |
| Contactor Style | IEC |
| Reversing Capability | Non-Reversing |
| Electrical Operating Durability | 1,000,000, 850,000 |
| Mechanical Operating Durability | 8,000,000 |
| Frequency | 50/60 Hz |
| Maximum Operating Temperature | 140 Degrees F |
| Number of Auxillary Contacts | 2 |
| Full Load Current - Inductive | 150 A |
| Horsepower @ Three Phase - 480V AC | 100 hp |
| Horsepower @ Three Phase - 240V AC | 50 hp |
| Mounting Style | DIN Rail, Plate |
| NEMA Enclosure Material | Not Applicable |
| Number of Normally Open Main Contacts | 3 |
| Overall Width | 0.47 in |
| Horsepower @ Three Phase - 208V AC | 40 hp |
| Includes Auxiliary Contacts | Yes |
| Minimum Operating Temperature | -40 Degrees F |
| Overall Height | 6.22 in |
| Overall Depth | 5.35 in |
| Horsepower @ Three Phase - 600V AC | 125 hp |
| Maximum Voltage Rating | 1000V AC |
| Full Load Current - Resistive | 200 A |
| Horsepower @ Single Phase - 240V AC | 3 hp |
| NEMA Enclosure Rating | No Enclosure |
| Coil Voltage | 208V AC |
| Coil Technology | Built-in bidirectional peak limiting diode suppressor |
| Protective Cover | With |
| Minimum Switching Voltage | 17 V for signalling circuit |
| Maximum Operating Rate | 1200 cyc/h 140°F (60°C) |
| Control Circuit Voltage | 208 V AC 50/60 Hz |
| Contactor Application | Resistive load, Motor control |
| Inrush Power in VA | 280 to 350 VA 60 Hz cos phi 0.9 (at 68°F (20°C)), 280 to 350 VA 50 Hz cos phi 0.9 (at 68°F (20°C)) |
| Pollution Degree | 3 |
| Product Certifications | GL, GOST, DNV, LROS (Lloyds register of shipping), CSA, BV, RINA, CCC, UL, UKCA, CE |
| Rated Impulse Withstand Voltage | 8 kV IEC 60947 |
| Heat Dissipation | 3 to 4.5 W at 50/60 Hz |
| Flame Retardance | V1 conforming to UL 94 |
| Power Dissipation Per Pole | 24 W AC-1, 13.5 W AC-3, 13.5 W AC-3e |
| Poles Description | 3P |
| Fire Resistance | 1562°F (850°C) IEC 60695-2-1 |
| Rated Insulation Voltage | Power circuit 600 V CSA, Power circuit 600 V UL, Power circuit 1000 V IEC 60947-4-1, Signalling circuit 690 V IEC 60947-1, Signalling circuit 600 V CSA, Signalling circuit 600 V UL |
| IRMS Rated Making Capacity | 140 A AC for signalling circuit conforming to IEC 60947-5-1, 250 A DC for signalling circuit conforming to IEC 60947-5-1, 1660 A at 440 V for power circuit conforming to IEC 60947 |
| Rated Operational Current | 200 A (at Less than 140°F (60°C)) at Less than or Equal to 440 V AC AC-1 for power circuit, 150 A (at Less than 140°F (60°C)) at Less than or Equal to 440 V AC AC-3 for power circuit, 150 A (at Less than 140°F (60°C)) at Less than or Equal to 440 V AC AC-3e for power circuit |
| Conventional Free Air Thermal Current | 200 A (at 140°F (60°C)) for power circuit |
| Average Impedance | 0.6 mOhm - Ith 200 A 50 Hz for power circuit |
| Operating Altitude | 0 to 9842.52 ft (0 to 3000 m) |
| Rated Operational Voltage | Power circuit Less than or Equal to 1000 V AC 25 to 400 Hz, Power circuit Less than or Equal to 300 V DC |
| Auxiliary Contact Composition | 1 NO + 1 NC |
| Product Or Component Type | Contactor |
| Connections - Terminals | Control circuit: screw clamp terminals 2 0.00 to 0.00 in? (1 to 2.5 mm?) - cable stiffness: flexible with cable end, Control circuit: screw clamp terminals 1 0.00 to 0.00 in? (1 to 2.5 mm?) - cable stiffness: flexible with cable end, Control circuit: screw clamp terminals 1 0.00 to 0.00 in? (1 to 2.5 mm?) - cable stiffness: flexible without cable end, Control circuit: screw clamp terminals 2 0.00 to 0.00 in? (1 to 2.5 mm?) - cable stiffness: flexible without cable end, Control circuit: screw clamp terminals 1 0.00 to 0.00 in? (1 to 2.5 mm?) - cable stiffness: solid without cable end, Control circuit: screw clamp terminals 2 0.00 to 0.00 in? (1 to 2.5 mm?) - cable stiffness: solid without cable end, Power circuit: connector 1 0.02 to 0.19 in? (10 to 120 mm?) - cable stiffness: flexible without cable end, Power circuit: connector 2 0.02 to 0.08 in? (10 to 50 mm?) - cable stiffness: flexible without cable end, Power circuit: connector 1 0.02 to 0.19 in? (10 to 120 mm?) - cable stiffness: flexible with cable end, Power circuit: connector 2 0.02 to 0.08 in? (10 to 50 mm?) - cable stiffness: flexible with cable end, Power circuit: connector 1 0.02 to 0.19 in? (10 to 120 mm?) - cable stiffness: solid without cable end, Power circuit: connector 2 0.02 to 0.08 in? (10 to 50 mm?) - cable stiffness: solid without cable end |
| Permissible Ambient Air Temperature Around The Device | -40 to 140°F (-40 to 60°C), 140 to 158°F (60 to 70°C) with derating |
| Associated Fuse Rating | 10 A gG for signalling circuit conforming to IEC 60947-5-1, 315 A gG at Less than or Equal to 690 V coordination type 1 for power circuit, 250 A gG at Less than or Equal to 690 V coordination type 2 for power circuit |
| Minimum Switching Current | 5 mA for signalling circuit |
| Pole Contact Composition | 3 NO |
| Control Circuit Type | AC 50/60 Hz |
| Maximum Horse Power Rating | 40 hp at 200/208 V AC 50/60 Hz for 3 phase motors, 50 hp at 230/240 V AC 50/60 Hz for 3 phase motors, 100 hp at 460/480 V AC 50/60 Hz for 3 phase motors, 125 hp at 575/600 V AC 50/60 Hz for 3 phase motors |
| Mechanical Robustness | Vibrations contactor open 2 Gn, 5 to 300 Hz), Vibrations contactor closed 4 Gn, 5 to 300 Hz), Shocks contactor closed 15 Gn for 11 ms), Shocks contactor open 6 Gn for 11 ms) |
| Rated Short Time Withstand Current | 250 A 104°F (40°C) - 10 min for power circuit, 580 A 104°F (40°C) - 1 min for power circuit, 1200 A 104°F (40°C) - 10 s for power circuit, 1400 A 104°F (40°C) - 1 s for power circuit, 100 A - 1 s for signalling circuit, 120 A - 500 ms for signalling circuit, 140 A - 100 ms for signalling circuit |
| Safety Reliability Level | B10d = 684932 cycles contactor with nominal load EN/ISO 13849-1, B10d = 10000000 cycles contactor with mechanical load EN/ISO 13849-1 |
| Mounting Support | Rail, Plate |
| IP Degree Of Protection | IP20 front face IEC 60529 |
| Compatibility Code | LC1D |
| Motor Power KW | 40 kW at 220 to 230 V AC 50/60 Hz (AC-3), 75 kW at 380 to 400 V AC 50/60 Hz (AC-3), 80 kW at 415 to 440 V AC 50/60 Hz (AC-3), 90 kW at 500 V AC 50/60 Hz (AC-3), 100 kW at 660 to 690 V AC 50/60 Hz (AC-3), 75 kW at 1000 V AC 50/60 Hz (AC-3), 22 kW at 400 V AC 50/60 Hz (AC-4), 40 kW at 220 to 230 V AC 50/60 Hz (AC-3e), 75 kW at 380 to 400 V AC 50/60 Hz (AC-3e), 80 kW at 415 to 440 V AC 50/60 Hz (AC-3e), 90 kW at 500 V AC 50/60 Hz (AC-3e), 100 kW at 660 to 690 V AC 50/60 Hz (AC-3e), 75 kW at 1000 V AC 50/60 Hz (AC-3e) |
| Utilisation Category | AC-1, AC-4, AC-3, AC-3e |
| Hold-In Power Consumption in VA | 2 to 18 VA 60 Hz cos phi 0.9 (at 68°F (20°C)), 2 to 18 VA 50 Hz cos phi 0.9 (at 68°F (20°C)) |
| Contact Compatibility | M13 |
| Protective Treatment | THIEC 60068-2-30 |
| Auxiliary Contacts Type | Mechanically linked 1 NO + 1 NC IEC 60947-5-1, Mirror contact 1 NC IEC 60947-4-1 |
| Climatic Withstand | IACS E10 exposure to damp heat |
| Insulation Resistance | Greater than 10 MOhm for signalling circuit |
| Country of Origin (subject to change) | Czechia |
| Package Quantity | 1 |
IEC Magnetic Contactor, 3 Poles, 208 V AC, 150 A, Reversing: No, SCHNEIDER, Mfr# LC1D150LE7
$749,99
Free shipping will be applied on orders over $50
IEC Magnetic Contactor, Auxiliary Contact Form 1NO/1NC, NEMA Enclosure Rating No Enclosure, NEMA Size Not Applicable, Coil Voltage 208V AC, Number of Poles 3, Full Load Current - Inductive 150 A, Full Load Current - Resistive 200 A, Reversing Capability Non-Reversing, Overall Height 6.22 in, Overall Width 0.47 in, Terminal Connection Type Screw Clamp Terminals, Mounting Style DIN Rail, Plate, Series TeSys Deca, Number of Auxillary Contacts 2, Contactor Style IEC
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.