| Bearing Insert Type | Radial Ball |
| Bore Dia. | 1 1/4 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Cast Iron |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 5 in |
| Mounting Surface to Shaft Center | 1 7/8 in |
| Series | Standard Duty |
| Number of Bolts | 2 |
| Bolt Size | 1/2 in |
| Housing Material | Cast Iron |
| Dimension A | 1 7/8 in |
| Dimension J | 5 in |
| Dimension H1 | 23/32 in |
| Locking Type | Set Screw |
| Dimension E | 7 1/4 in |
| Overall Height | 3.661 in |
| Bearing Lubrication | Shell Alvania #3 or NLGI #3 Equivalent |
| Dimension L | 6 9/16 in |
| Static Load Capacity | 3,440 lb |
| Overall Width | 1.875 in |
| Dimension H | 1 7/8 in |
| Dimension S | 11/16 in |
| Overall Length | 6.574 in |
| Dimension N | 21/32 in |
| Item | Pillow Block Bearing |
| Finish | Painted |
| Dimension H2 | 3 21/32 in |
| Dynamic Load Capacity | 5,750 lb |
| Temp. Range | -20 Degrees to 250 Degrees F |
| Dimension B | 1 11/16 in |
| Closure | Open |
| Center Height | 1 55/64 in |
| System of Measurement | Inch |
| Dynamic Radial Load Capacity | 5,778 lbf |
| Housing Material Finish | Painted |
| Mount Hole Size | 0.669 in x 0.787 in |
| Base Width | 1.889 in |
| Bore Diameter | 1 1/4 in |
| Lubricant Material | NLGI #3 Equivalent |
| Bore Type | Cylindrical |
| Static Radial Load Capacity | 3,440 lbf |
| Number of Mount Holes | 2 |
| Mount Type | Bolt-Through |
| Minimum Temperature | -40 Degrees F |
| Mount Hole Center-to-Center Length | 5 in |
| Inner Ring Width | 1.689 in |
| Seal Material | Nitrile Rubber |
| Maximum Speed | 4,200 RPM |
| Features | Light Duty |
| Mounting Bolt Size | 1/2 in |
| Base Height | 0.708 in |
| Bearing Material Grade | 52100 |
| Maximum Temperature | 250 Degrees F |
| Seal Type | Contact |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 1-1/4" Bore, NTN, Mfr# UCP207-104D1
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.708 in, Base Width 1.889 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 1/4 in, Bore Type Cylindrical, Center Height 1 55/64 in, Closure Open, Housing Material Cast Iron, Lubricant Material NLGI #3 Equivalent, Maximum Speed 4,200 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Mount Hole Center-to-Center Length 5 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 3.661 in
9999 in stock
Must order in multiples of 1
Subtotal:
$70.29
You must be logged in to post a review.
Reviews
There are no reviews yet.