| Temp. Range | -40 Degrees to 250 Degrees F |
| Static Load Capacity | 93,300 lb |
| Item | Pillow Block Bearing |
| Includes | Non-Expansion M2000 Spherical Roller Bearing |
| Bore Dia. | 4 in |
| Dynamic Load Capacity | 69,900 lb |
| Dimension D | 10 in |
| Dimension B | 14 1/2 in |
| Bearing Lubrication | Lithium Complex Grease |
| Dimension A | 4 3/4 in |
| Dimension L | 6 in |
| Dimension M | 4 1/8 in |
| Dimension J | 8 3/8 in |
| Dimension G | 1 15/16 in |
| Shaft Locking Type | Set Screws |
| Number of Bolts | 2 |
| Bolt Size | 1 in |
| Bearing Insert Type | Spherical Roller |
| Bearing Housing Material Type | Cast Iron |
| Bolt Hole Center-to-Center | 11 3/4 in |
| Overall Height | 8.375 in |
| Dimension F | 1 in |
| Overall Width | 4.75 in |
| Mounting Surface to Shaft Center | 4 1/8 in |
| Dimension C | 3 9/16 in |
| Dimension H | 2 1/2 in |
| Dimension N | 4 19/32 in |
| Overall Length | 14.5 in |
| Bearing Insert Material | Alloy Steel |
| Max. Speed | 1,200 RPM |
| Housing Material | Cast Iron |
| Bearing Material Grade | 52100 |
| Mounting Bolt Size | 1 in |
| Static Radial Load Capacity | 93,300 lbf |
| Number of Mount Holes | 2 |
| Load Direction | Thrust |
| Dynamic Axial Load Capacity | 69,900 lbf |
| Features | +/-11/2 Degrees Misalignment Capacity, Assembled, Adjusted and Pre-Lubricated in Advance for Immediate Use, Built with Skf(TM) and Timken(TM) Spherical Roller Bearings, Expansion Units have .100 in Capacity, Piloted Flange Housings are Machined with Back-Out Holes, Precision Ground Contours, Rotating Center Guide Ring for Least Possible Friction, Single Piece Outer Race is Grooved and has 3 Lube Holes for Even Distribution of Grease), Standard Units have One Locking Collar, Timken(TM) Lithium Complex Grease Operating Temperature is up to 250 Degrees , High Temperature Grease is Available up to 350 Degrees , will Accommodate Moderate Thrust Loads and Permits Angular Misalignment without Loss of Capacity |
| Application | Air Handling, Conveying, Food Processing, Paper and Forestry, Screening |
| Mount Type | Bolt-Through |
| Minimum Temperature | -40 Degrees F |
| Maximum Speed | 1,200 RPM |
| Lubricant Material | Lithium Grease |
| Maximum Misalignment Angle | 5.5 Degrees |
| System of Measurement | Inch |
| Mount Hole Size | 1 15/16 in |
| Included Bearing | Non-Expansion M2000 Spherical Roller |
| Expansion Type | Fixed |
| Base Height | 2.5 in |
| Seal Type | Contact |
| Base Width | 3.56 in |
| Mount Hole Center-to-Center Length | 10 7/8 in |
| Center Height | 4.125 in |
| Bore Diameter | 4 in |
| Maximum Temperature | 250 Degrees F |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Pillow Block Bearing, 4 in Bore, Cast Iron, MOLINE BEARING, Mfr# 19221400
$1256,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 2.5 in, Base Width 3.56 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Spherical Roller, Bore Diameter 4 in, Center Height 4.125 in, Expansion Type Fixed, Housing Material Cast Iron, Included Bearing Non-Expansion M2000 Spherical Roller, Lubricant Material Lithium Grease, Maximum Speed 1,200 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Mount Hole Center-to-Center Length 10 7/8 in, Mount Type Bolt-Through
9999 in stock
Must order in multiples of 1
Subtotal:
$1256.99
You must be logged in to post a review.
Reviews
There are no reviews yet.