Shaft Locking Type - Couplings | 2 Piece Clamp |
Item | Rigid Shaft Coupling |
System of Measurement | Metric |
Bore Dia. | 8 mm |
Material - Couplings | Steel |
Outside Dia. | 24 mm |
Overall Length | 35 mm |
With Keyway / Without Keyway | Without Keyway |
Finish | black oxide |
Clearance Dia. (mm) | 27.10 |
Item - Rigid Shaft Couplings | Rigid Shaft Coupling |
Design | Four Vibration Resistant Socket Capscrews |
Screw Size | M3 |
Screw Size (mm) | M3 |
Max. Torque (In.-Lbs.) | 275 |
Max. Torque | 275 in-lb |
Type | Two Piece Clamp Type, Without Keyway |
Provides | Extra Holding Power for Higher Load Applications without Marring Shafts |
Clearance Dia. | 27.1 mm |
Machined From | Bar Stock |
Material | Black Oxide Steel |
Application | For Applications where Alignment is Critical, Particularly when no Backlash is Desired and Flexibility is not Required, Useful when Timing, Joining and/or Aligning Shafts at Lower Speeds and Torque |
Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS3 Compliant |
Bore Tolerance | +0.050 mm / +0.012 mm |
Screw Material | Alloy Steel |
Bore Diameter 1 | 8 mm |
Recommended Gap | 1.19 mm |
Coupling Material | Carbon Steel |
Maximum Operating Temperature | 176 Degrees C |
Screw Thread Size | M3 |
Number of Locking Screws | 8 |
Features | Precision Honed Bores, Vibration-Resistant Screws |
Keyway Depth 1 | Not Applicable |
Keyway Width 1 | Not Applicable |
Different Bore Sizes | No |
Coupling Construction | Two-Piece |
Bore Type | Round |
Included Screws | (8) Clamp Screws |
Coupling Outside Diameter | 24 mm |
Keyway Width 2 | Not Applicable |
Maximum Bore Diameter | 8 mm |
Fastener Tightening Torque | 2.1 N-m |
Shaft Tolerance | +0.000 mm / -0.013 mm |
Minimum Operating Temperature | -40 Degrees C |
Zero Backlash | Yes |
Maximum Torque | 50 N-m |
Screw Material Finish | Black Oxide |
Coupling Material Finish | Black Oxide |
Bore Diameter 2 | 8 mm |
Screw Location from Center | 9 mm |
Maximum Speed | 4,000 RPM |
Shaft Locking Type | Clamp On |
Keyway Depth 2 | Not Applicable |
Clearance Diameter | 21.5 mm |
Resistance Properties | Corrosion Resistant |
Coupling Material Grade | 1215 |
Minimum Bore Diameter | 8 mm |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Coupling, Two Piece, Bore Dia 8 mm, RULAND, Mfr# MSPX-8-8-F
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Rigid Shaft Coupling, Bore Diameter 1 8 mm, Bore Diameter 2 8 mm, Bore Type Round, Clearance Diameter 21.5 mm, Coupling Construction Two-Piece, Coupling Material Carbon Steel, Coupling Outside Diameter 24 mm, Different Bore Sizes No, Keyway Depth 1 Not Applicable, Keyway Depth 2 Not Applicable, Minimum Bore Diameter 8 mm, Keyway Width 1 Not Applicable, Keyway Width 2 Not Applicable, Maximum Bore Diameter 8 mm, Maximum Speed 4,000 RPM, Maximum Torque 50 N-m, Overall Length 35 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$52.99
You must be logged in to post a review.
Reviews
There are no reviews yet.