| Screw Material | Alloy Steel |
| Screw Seating Torque | 16 N-m |
| System of Measurement | Metric with Inch Bore |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015 Certified, REACH Compliant, RoHS3 Compliant |
| Item | Mountable Shaft Collar |
| Width Tolerance | +0.076/-0.254 mm |
| Bore Tolerance | +0.0020/+0.0005 in |
| Collar Material Grade | 1215 |
| Minimum Operating Temperature | -40 Degrees C |
| Bore Diameter | 1 in |
| Bore Type | Round |
| Keyway Width | Not Applicable |
| Screw Material Finish | Black Oxide |
| Collar Material | Carbon Steel |
| Collar Material Finish | Black Oxide |
| Collar Outside Diameter | 45 mm |
| Collar Construction | 1-Piece |
| For Shaft Diameter | 1 in |
| Clearance Diameter | 52.1 mm |
| Included Screws | Clamp Screw |
| Screw Thread Size | M6 |
| Collar Width | 15 mm |
| Keyway Depth | Not Applicable |
| Component Mount Type | Face Mount Holes |
| Mount Hole Size | 6.35 mm |
| Bore Thread Size | Not Applicable |
| Resistance Properties | Corrosion Resistant |
| Shaft Locking Type | Clamp On |
| Maximum Operating Temperature | 176 Degrees C |
| Shaft Tolerance | +0.0000/-0.0005 in |
| Inside Height to Flat | Not Applicable |
| Screw Location from Center | 17.5 mm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
SHAFT COLLAR MOUNTABLE, RULAND, Mfr# FHD-MCL-16E-F
$11,99
Free shipping will be applied on orders over $50
Mountable Shaft Collar, System of Measurement Metric with Inch Bore, Bore Type Round, Bore Diameter 1 in, Bore Thread Size Not Applicable, Collar Outside Diameter 45 mm, Inside Height to Flat Not Applicable, Clearance Diameter 52.1 mm, Collar Width 15 mm, Collar Material Carbon Steel, Keyway Width Not Applicable, Collar Material Grade 1215, Keyway Depth Not Applicable, Collar Construction 1-Piece, Screw Material Alloy Steel, Screw Material Finish Black Oxide
9999 in stock
Must order in multiples of 1
Subtotal:
$11.99
You must be logged in to post a review.
Reviews
There are no reviews yet.