| Screw Material | Alloy Steel |
| System of Measurement | Metric with Inch Bore |
| Bore Tolerance | +0.0020/+0.0005 in |
| Width Tolerance | +0.076/-0.254 mm |
| Item | Mountable Shaft Collar |
| Screw Seating Torque | 16 N-m |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015 Certified, REACH Compliant, RoHS3 Compliant |
| Resistance Properties | Corrosion Resistant |
| Inside Height to Flat | Not Applicable |
| Shaft Locking Type | Clamp On |
| Included Screws | Clamp Screw |
| Collar Construction | 1-Piece |
| Screw Material Finish | Black Oxide |
| Maximum Operating Temperature | 176 Degrees C |
| Clearance Diameter | 52.1 mm |
| Collar Width | 15 mm |
| Collar Outside Diameter | 45 mm |
| Minimum Operating Temperature | -40 Degrees C |
| Bore Diameter | 1 in |
| Component Mount Type | Face Mount Holes |
| Bore Thread Size | Not Applicable |
| Collar Material Grade | 1215 |
| Keyway Width | Not Applicable |
| Keyway Depth | Not Applicable |
| Mount Hole Thread Size | M6 |
| Bore Type | Round |
| Shaft Tolerance | +0.0000/-0.0005 in |
| Collar Material Finish | Black Oxide |
| For Shaft Diameter | 1 in |
| Collar Material | Carbon Steel |
| Screw Thread Size | M6 |
| Screw Location from Center | 17.5 mm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
SHAFT COLLAR MOUNTABLE, RULAND, Mfr# FHT-MCL-16E-F
$11,99
Free shipping will be applied on orders over $50
Mountable Shaft Collar, System of Measurement Metric with Inch Bore, Bore Type Round, Bore Diameter 1 in, Bore Thread Size Not Applicable, Collar Outside Diameter 45 mm, Inside Height to Flat Not Applicable, Clearance Diameter 52.1 mm, Collar Width 15 mm, Collar Material Carbon Steel, Keyway Width Not Applicable, Collar Material Grade 1215, Keyway Depth Not Applicable, Collar Construction 1-Piece, Screw Material Alloy Steel, Screw Material Finish Black Oxide
9999 in stock
Must order in multiples of 1
Subtotal:
$11.99
You must be logged in to post a review.
Reviews
There are no reviews yet.