| Screw Material | Alloy Steel |
| Bore Tolerance | +0.0020/+0.0005 in |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015 Certified, REACH Compliant, RoHS3 Compliant |
| System of Measurement | Metric with Inch Bore |
| Item | Mountable Shaft Collar |
| Screw Seating Torque | 4.6 N-m |
| Width Tolerance | +0.076/-0.254 mm |
| Bore Type | Round |
| Component Mount Type | Face Mount Holes |
| Collar Material Finish | Black Oxide |
| Keyway Width | Not Applicable |
| Shaft Tolerance | +0.0000/-0.0005 in |
| Collar Outside Diameter | 28 mm |
| Bore Diameter | 7/16 in |
| Maximum Operating Temperature | 176 Degrees C |
| Mount Hole Thread Size | M4 |
| Collar Material Grade | 1215 |
| Screw Material Finish | Black Oxide |
| Screw Location from Center | 10.01 mm |
| Shaft Locking Type | Clamp On |
| Collar Width | 11 mm |
| Clearance Diameter | 32 mm |
| Screw Thread Size | M4 |
| Minimum Operating Temperature | -40 Degrees C |
| Collar Construction | 1-Piece |
| For Shaft Diameter | 7/16 in |
| Keyway Depth | Not Applicable |
| Bore Thread Size | Not Applicable |
| Resistance Properties | Corrosion Resistant |
| Included Screws | Clamp Screw |
| Collar Material | Carbon Steel |
| Inside Height to Flat | Not Applicable |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
SHAFT COLLAR MOUNTABLE, RULAND, Mfr# FHT-MCL-7E-F
$8,99
Free shipping will be applied on orders over $50
Mountable Shaft Collar, System of Measurement Metric with Inch Bore, Bore Type Round, Bore Diameter 7/16 in, Bore Thread Size Not Applicable, Collar Outside Diameter 28 mm, Inside Height to Flat Not Applicable, Clearance Diameter 32 mm, Collar Width 11 mm, Collar Material Carbon Steel, Keyway Width Not Applicable, Collar Material Grade 1215, Keyway Depth Not Applicable, Collar Construction 1-Piece, Screw Material Alloy Steel, Screw Material Finish Black Oxide
9999 in stock
Must order in multiples of 1
Subtotal:
$8.99
You must be logged in to post a review.
Reviews
There are no reviews yet.