| Property | Value |
|---|---|
| Item | Magnetic Drive Pump |
| HP | 1/25 hp |
| Voltage | 115 |
| Inlet | 1/2 in MPT |
| Outlet | 1/2 in MPT |
| Max. Head | 16.2 ft |
| Housing Material | Glass-Filled Polyphenylene |
| Length | 8 in |
| Width | 4 in |
| Full Load Amps | 1.40 |
| Gasket Material | FKM |
| Mounting | Horizontal |
| GPM of Water @ 3 Ft. of Head | 7.6 gpm |
| Temp. @ 0 psig | 180 Degrees F |
| Cord Type | 3-conductor SJO |
| GPM of Water @ 9 Ft. of Head | 5.9 gpm |
| Temp. @ 20 psig | 145 Degrees F |
| Max. Specific Gravity | 1.1 |
| Motor Type | Shaded Pole |
| Temp. @ 10 psig | 165 Degrees F |
| Impeller Material | Carbon, Glass-Filled Polyphenylene Sulfide |
| Cord Length | 6 ft |
| GPM of Water @ 6 Ft. of Head | 7.1 gpm |
| Design | Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level |
| Height | 5 1/2 in |
| Max. Viscosity | 100 SSU |
| Application | For Highly Corrosive Chemicals, Eliminates Seal-caused Friction Loss, Wear, Contamination and Leakage |
| Bearing Type | Thrust |
| Temp. @ 30 psig | 135 Degrees F |
| Series | MD-HC |
| GPM of Water @ 15 Ft. of Head | 1.7 gpm |
| Motor Enclosure | Open Fan Cooled |
| Overall Width | 3.9 in |
| Overall Height | 5.2 in |
| Overall Length | 8.3 in |
| Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
| Intake Pipe Size | 1/2 in |
| Flow Rate @ 18 ft of Head (Maximum) | Not Applicable |
| Discharge Pipe Type | NPT |
| Viscosity (Maximum) | 100 SUS |
| Discharge Pipe Size | 1/2 in |
| Flow Rate @ 9 ft of Head (Maximum) | 5.9 gpm |
| Flow Rate @ 40 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 6 ft of Head (Maximum) | 7.1 gpm |
| Motor Mounting Type | Horizontal |
| Specific Gravity (Maximum) | 1.1 |
| Media Temperature (Maximum) | 200 Degrees F |
| Nameplate Voltage | 115V AC |
| Discharge Port | 1/2 in NPT |
| Frequency | 60 Hz |
| Operating Pressure (Maximum) | 7.01 psi |
| Manufacturers Warranty Length | 1 yr |
| Full Load Current | 1.3 A |
| Horsepower (Maximum) | 1/25 hp |
| Feet of Head (Maximum) | 16.2 ft |
| Flow Rate @ 24 ft of Head (Maximum) | Not Applicable |
| Suction Port | 1/2 in MNPT |
| Flow Rate @ 3 ft of Head (Maximum) | 7.6 gpm |
| Phase | Single |
| Ambient Temperature (Maximum) | 77 Degrees F |
| Flow Rate @ 15 ft of Head (Maximum) | 1.7 gpm |
| Intake Pipe Type | MNPT |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |
1/25 HP PPS Magnetic Drive Pump 115V 1/2" MPT, Little Giant Pump, Mfr#: 578603
$292.99
Free shipping will be applied on orders over $50
Magnetic Drive Pump, Discharge Pipe Size 1/2 in, Discharge Pipe Type NPT, Feet of Head (Maximum) 16.2 ft, Flow Rate @ 3 ft of Head (Maximum) 7.6 gpm, Flow Rate @ 6 ft of Head (Maximum) 7.1 gpm, Flow Rate @ 9 ft of Head (Maximum) 5.9 gpm, Flow Rate @ 15 ft of Head (Maximum) 1.7 gpm, Flow Rate @ 24 ft of Head (Maximum) Not Applicable, Flow Rate @ 50 ft of Head (Maximum) Not Applicable, Horsepower (Maximum) 1/25 hp, Intake Pipe Size 1/2 in, Intake Pipe Type MNPT, Nameplate Voltage 115V AC
9999 in stock
Subtotal:
$292.99
You must be logged in to post a review.
Reviews
There are no reviews yet.