18in SATA 6Gbps Cbl with Locking Latch (90-degree to 180-degree)_ Blue, Monoprice, Mfr#: 8783

Each major revision of the Serial ATA interface specification has doubled the maximum data transfer rate. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps. While the cables for all three revisions appear to be similar and will physically fit into the connectors on all SATA drives and controllers; the higher data transfer rate of SATA 6 Gbps requires higher quality materials and closer tolerances than the previous two revisions required. Monoprice SATA 6 Gbps cables are certified to provide maximum speeds from your SATA system; up to 6 Gbps when used with equivalent devices and controllers. One end of this internal cable features a straight connector; while the other end uses a 90-degree connector; which can make for better cable management in some situations; especially in tight spaces. Each end has an attached locking latch; to ensure that your connections do not come loose due to movement or vibration. Note that SATA 6 Gbps cables are backwards compatible and can be used with SATA 3 Gbps and SATA 1.5 Gbps devices. However; the data transfer of the SATA subsystem will be limited to that of the slowest device. So; for example; if a SATA 6 Gbps cable is connected to a SATA 3 Gbps drive and a SATA 1.5 Gbps controller; the drive will be limited to a transfer rate of 1.5 Gbps.