| Item | AC Gearmotor |
| Gearmotor Voltage | 230V AC |
| Gearmotor Phase | 3 |
| Gearmotor Type | AC Gearmotor |
| Max. Torque | 500 in-lb |
| Gearmotor Shaft Type | Single |
| Gearmotor Shaft Orientation | Parallel |
| Nameplate RPM | 12 RPM |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Rotation | CW/CCW |
| Gearmotor Brake Type | None |
| Length Less Shaft | 223 mm |
| Gearmotor Mounting Position | All Angle |
| Full Load Amps | 0.5 |
| Keyway Size Type | 6mmSQ X 25mm |
| Standards | UL Listed |
| Input HP | 1/8 hp |
| Shaft Length (Dimension V) | 40 mm |
| Rotation | CW/CCW |
| Max. Ambient Temp. | 40 Degrees C |
| Gears | Steel |
| Shaft Dia. (Dimension U) | 16 mm |
| Seals | Triple Lip Cartridge Seal With Stainless Slinger |
| Shaft Orientation | Parallel |
| Gear Case Material | 304 Stainless Steel |
| Phase | Three |
| RPM Range | 0 to 15 |
| Reversible Shaft Output | Yes |
| Application | Washdown |
| Voltage | 230 |
| Thermal Protection | None |
| Housing | 304 Stainless Steel |
| Mounting | All Position |
| Insulation Class | F |
| Motor Type | 3-Phase |
| Enclosure | TENV |
| Lubrication | Food Grade Grease |
| Gear Ratio | 140:1 |
| RPM @ 50 Hz | 8 RPM |
| No Load RPM | 12 RPM |
| Finish | Unpainted |
| Shaft | Single |
| Includes | 2m Straight Connector Power Cord |
| Overhung Load | 165 lb |
| Keyway Size | 6mmSQ X 25mm |
| Starting Torque | 800 in-lb |
| Bearings | Sealed Ball |
| Gear Material | Steel |
| Overall Length | 10.66 in |
| Gear Type | Right-Angle |
| Housing Material | 304 Stainless Steel |
| Number of Output Shafts | 1 |
| Bearing Type | Sealed Ball |
| No Load Speed | 12 RPM |
| Full Load Current | 0.5 A |
| Maximum Ambient Temperature | 104 Degrees F |
| Inverter Rating | 140:1 |
| Output Shaft Length | 1 1/2 in |
| Maximum Output Speed | 12 RPM |
| Brake Type | None |
| Overall Height | 3.92 in |
| Overall Width | 3.92 in |
| Operating Voltage | 230V AC |
| Inverter Rated | Yes |
| Seal Type | Triple Lip Cartridge Seal With Stainless Slinger |
| Mount Hole Center-to-Center Length | 3.14 in |
| Keyway Depth | 3/16 in |
| Nameplate Speed | 12 RPM |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Mounting Orientation | Any Angle |
| Mount Type | Any Position |
| Motor Insulation Class | F |
| Keyway Type | Rounded |
| Maximum Torque | 500 in-lb |
| Input Horsepower | 0.125 hp |
| Output Shaft Diameter | 5/8 in |
| Output Shaft Height | 2.5 in |
| Keyway Width | 5 mm |
| Mount Hole Center-to-Center Width | 3.14 in |
| Shaft Material Grade | Type 304 |
| Overhung Load Capacity | 165 ft-lb |
| Housing Material Finish | Unpainted |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
AC Gearmotor, 500.0 in-lb Max. Torque, 12 RPM Nameplate RPM, 230V AC Voltage, 3 Phase, BISON GEAR & ENGINEERING, Mfr# 017-260-0140
$1189,99
Free shipping will be applied on orders over $50
AC Gearmotor, Number of Output Shafts 1, Motor Type 3-Phase, Motor Enclosure Totally Enclosed Nonventilated, Nameplate Speed 12 RPM, Maximum Torque 500 in-lb, Overhung Load Capacity 165 ft-lb, Rotation CW/CCW, Output Shaft Height 2.5 in, Mounting Orientation Any Angle, Operating Voltage 230V AC, Inverter Rated Yes, Gear Ratio 140:1, Brake Type None, Shaft Orientation Parallel, Shaft Material Grade Type 304, Motor Insulation Class F, Application Washdown
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.