Item
Power Inverter and Battery Charger
Continuous Output Power
750 W
Inverter Output Form
Modified Sine Wave
Inverter Input Voltage
12V DC; 120V AC
Inverter Output Voltage
120V AC
Outlet Type
Standard 3-Prong Outlet
DC Connection
Bolt Down Terminals
Case Material
Polycarbonate
Max. Input Current
Full continuous load - 72 A at 12V DC; AC INPUT: 8 A at 120V AC with full inverter and charger load
Features
Automatic Transfer Switching, Emergency and Remote Sites, Front Panel Leds, Meets Normal and Peak Power Demands, Optional Remote Control Capability, Reliable Power for Mobile, Rugged Polycarbonate Housing
Charger Output Voltage
120V
Charger Input Voltage
120V AC
Application
Powering Tools; Saws; Motors; Pumps; Portable Lighting; Appliances and Computer Equipment in Heavy-Load Conditions
Automatic/Manual
Automatic
Nominal Output Power
750 W
Inveter Output Voltage
120V
Charger Output Current
20 A
Charger DxWxH
9 in x 8.8 in x 7 in
Charger Input Current
4.2 A
Input Voltage Range
10 V DC - 15 V DC
Protection Type
Overload Protection
Additional Information
Frequency control for operating stability, AC surge suppression not included, Material of construction: Polycarbonate, Low voltage transfer to battery power: User configurable to 75V, 85V, 95V u0026 105V, High voltage transfer to battery power: User configurable to 135V, 145V, Coated internal circuit boards offer continuous operation in humid environments, Advanced 20 amp, 3-stage battery charger and selector switch for gel or wet cell batteries, Functions as an extended run UPS system, standalone power source and automotive inverter, RJ-45 port allows connection of APS/PowerVerter Remote Switch (manuf# APSRM4), Switch allows user to select between off, auto-invert/remote and charge-only settings, Configuration switches to allow the user to select the high and low voltage, Mounting slots enable permanent placement of inverter on any horizontal surface, AC input cord and auto-transfer to enable battery charging and automatic UPS support for blackouts u0026 brownouts
Package Contents
PowerVerter APS 750W Inverter/Charger, Instruction Manual with Warranty Information
Product Name
PowerVerter APS 750W Inverter/Charger
Front Panel LEDs
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
Material of Construction
Polycarbonate
Output Frequency Regulation
60 Hz (+/- 0.3 Hz)
Output Receptacles
(2) 5-15R
Voltage Compatibility (VAC)
120
High Voltage Transfer to Battery Power
In AC
Unit Dimensions (hwd / in.)
7.000 x 8.750 x 9.000
Voltage Compatibility (VDC)
12
Maximum Input Amps / Watts
DC INPUT: Full continuous load - 72A at 12V DC. AC INPUT: 8 amps at 120VAC with full inverter and charger load (4.2A max charger-only)
Output Voltage Regulation
LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 120 V AC (+/-5%).
Relative Humidity
0%-95% Non-Condensing
Nominal Output Voltage(s) Supported
120V
Switches
3 position on/off/remote switch enables simple on/off power control plus
Frequency Compatibility
60 Hz
Overload Protection
Includes 6A AC input breaker dedicated to the charging system and 8A output breaker for AC output loads
Package Includes
APS750 750W PowerVerter APS 12V DC 120V AC Inverter/Charger;Owner's manual
Form Factors Supported
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
Low Voltage Transfer to Battery Power
In AC
Transfer Time (Line Power to Battery Mode)
16.6 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications)
Nominal Input Voltage(s) Supported
120V AC
DC System Voltage (VDC)
12
Recommended Electrical Service
DC INPUT: Requires 12V DC input source capable of delivering 72A for the required duration (when used at full continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). AC INPUT: 15A 120V AC recommended
AC Suppression Joule Rating
450
Country of Origin (subject to change)
China
