| Bearing Insert Type | Radial Ball |
| Bore Dia. | 1 5/8 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Stainless Steel |
| Bearing Insert Material | Stainless Steel |
| Bolt Hole Center-to-Center | 7 1/4 in |
| Mounting Surface to Shaft Center | 2 1/8 in |
| Series | SP-FG1 |
| Number of Bolts | 2 |
| Overall Width | 2.748 in |
| Includes | (2) Open End Caps |
| Finish | Unfinished |
| Bearing Lubrication | FDA/USDA-H1 Solid Grease |
| Item | Pillow Block Bearing |
| Overall Length | 7.48 in |
| Temp. Range | 14 Degrees to 212 Degrees F |
| Dynamic Load Capacity | 5,780 lb |
| Static Load Capacity | 4,680 lb |
| Overall Height | 4.291 in |
| Standards | FDA |
| Bolt Size | 1/2 in |
| Housing Material | Stainless Steel |
| Closure | Open |
| Mount Hole Center-to-Center Length | 5 47/64 in |
| Center Height | 2 1/8 in |
| Bore Type | Cylindrical |
| Minimum Temperature | -4 Degrees F |
| Base Height | 0.787 in |
| Lubricant Material | FDA/USDA-H1 Solid Grease |
| Bearing Material Grade | 440C |
| Bore Diameter | 1 5/8 in |
| Mounting Bolt Size | 1/2 in |
| Dynamic Radial Load Capacity | 5,778 lbf |
| Housing Material Grade | Type 304 |
| Static Radial Load Capacity | 4,676 lbf |
| Base Width | 2.126 in |
| Seal Material | Silicone |
| Features | Light Duty |
| Resistance Properties | Corrosion Resistant |
| Inner Ring Width | 1.937 in |
| Maximum Speed | 3,100 RPM |
| Maximum Temperature | 250 Degrees F |
| Seal Type | Contact |
| System of Measurement | Inch |
| Mount Type | Bolt-Through |
| Number of Mount Holes | 2 |
| Mount Hole Size | 0.669 in x 0.906 in |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Bearing, 1-5/8" Bore Dia., SS Housing, NTN, Mfr# SUCP209-26C0FG1
$556,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.787 in, Base Width 2.126 in, Bearing Insert Material Stainless Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 5/8 in, Bore Type Cylindrical, Center Height 2 1/8 in, Closure Open, Housing Material Stainless Steel, Lubricant Material FDA/USDA-H1 Solid Grease, Maximum Speed 3,100 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -4 Degrees F, Mount Hole Center-to-Center Length 5 47/64 in, Mount Type Bolt-Through, Number of Mount Holes 2
9999 in stock
Must order in multiples of 1
Subtotal:
$556.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.