| Item | Blower with Motor |
| Type | Double Inlet Forward Curve |
| Wheel Dia. | 10 5/8 in |
| Voltage | 208-230 |
| Wheel Width (In.) | 10 3/8 in |
| Discharge Width (In.) | 13 in |
| Motor HP | 3/4 hp |
| Discharge Height (In.) | 11 1/2 in |
| Housing Width (In.) | 13 in |
| Full Load Amps | 4.8/4.4 |
| Bearing Type | Sleeve |
| CFM @ 1.200-In. SP | 1925 1650 1135 975 |
| Motor RPM | 1075 |
| Assembled/Unassembled | Unassembled |
| CFM @ 1.250-In. SP | 1555 - - - |
| CFM @ 0.700-In. SP | # 2020 1745 1565 |
| Max. Inlet Temp. (Deg. F) | 104 Degrees F |
| CFM @ 1.70-In. SP | - - - - |
| Footnotes | # Motor Overload Condition |
| CFM @ 0.000-In. SP | # # # # |
| CFM @ 0.600-In. SP | # # # # |
| Blower RPM | 1,075 RPM |
| CFM @ 0.800-In. SP | # 2005 1735 1555 |
| Housing Height (In.) | 17 1/2 in |
| Motor Enclosure | Open Air-Over |
| CFM @ 1.30-In. SP | - - - - |
| CFM @ 0.500-In. SP | # # # # |
| Housing Depth (In.) | 16 3/4 in |
| CFM @ 0.900-In. SP | # 1905 1710 1530 |
| Max. Ambient Temp. (F) | 104 Degrees F |
| CFM @ 1.10-In. SP | 2060 1790 1590 1245 |
| Wheel Material | Steel |
| Hz | 60 |
| Housing Material | Steel |
| CFM @ 0.400-In. SP | # # # # |
| Phase | 1 |
| CFM @ 1.600-In. SP | - - - - |
| Speed | 4 |
| Speed Controllable | No |
| Housing Finish | None |
| Mounting | Multipostion |
| Drive Type | Direct Drive |
| Includes | Hardware, Housing Support |
| CFM @ 1.000-In. SP | 2200 1865 1675 1460 |
| CFM @ 1.40-In. SP | - - - - |
| CFM @ 1.500-In. SP | - - - - |
| Motor Type | Permanent Split Capacitor |
| CFM @ 0.300-In. SP | # # # # |
| CFM Range | 2020 to 1555 @ 0.7-In SP to 1.25-In SP |
| Material | Steel Wheel & Steel Housing |
| Application | Air Conditioning, Heating, Ventilation Systems |
| Standards | CSA Certified, UL Listed |
| Features | Includes Housing Support with Resilient Pads to Help Minimize Vibration, Adjustable Motor Mounting Bracket with Hardware, and Assembly Instructions, The Included Mounting Bracket Adjusts to Fit Blower Motors 3-13/16 in to 6-5/8 in L, Unit Can Replace Most Direct-Drive Blowers with the Same Horsepower Ratings and is Suitable for Use in New and Replacement Installations, Blower Wheel Reinforced to Ensure Optimal Performance and Trouble-Free Service, this Dayton Blower with Motor Has a Discharge That can be Rotated in Four 90 Degrees Increments |
| Airflow @ 13.00 in SP | Not Applicable |
| Airflow @ 1.000 in SP | 2,200 cfm |
| Number of Inlets | 2 |
| Airflow @ 9.000 in SP | Not Applicable |
| Airflow @ 12.00 in SP | Not Applicable |
| Manufacturer Warranty Length | 1 yr Limited |
| Includes Drive Package | Yes |
| Housing Depth | 16 3/4 in |
| Airflow @ 1.250 in SP | 1,555 cfm |
| Airflow @ 1.500 in SP Range | More than 4000 cfm |
| Airflow @ 10.00 in SP | Not Applicable |
| Motor Enclosure Design | Open Air-Over (OAO) |
| Airflow @ 2.000 in SP | Not Applicable |
| Housing Height | 17 1/2 in |
| Includes Mounting Hardware | Yes |
| Motor Duty Class | Continuous |
| Airflow @ 4.500 in SP | Not Applicable |
| Outlet Shape | Rectangular |
| Airflow @ 11.00 in SP | Not Applicable |
| Corrosion Resistant | Yes |
| Maximum Inlet Air Temperature | 104 Degrees F |
| Maximum Fan Speed | 1,075 RPM |
| Assembly | Unassembled |
| Number of Discharge Positions | 4 |
| For Fan Speed (Dependent on Motor) | 1,075 RPM |
| Housing Width | 13 in |
| Airflow @ 0.500 in SP Range | More than 4000 cfm |
| Frequency | 60 Hz |
| Wheel Width | 10 3/8 in |
| Motor Enclosure Design_Table | Open Motor |
| Airflow @ 2.500 in SP Range | More than 5000 cfm |
| Outlet Height | 11 1/2 in |
| Airflow @ 7.000 in SP | Not Applicable |
| Inlet Diameter | 8 11/16 in |
| Motor Horsepower | 3/4 hp |
| Maximum Ambient Temperature | 104 Degrees F |
| Airflow @ 4.000 in SP | Not Applicable |
| Number of Speeds | 4 |
| Airflow @ 5.000 in SP | Not Applicable |
| Airflow @ 1.500 in SP | Not Applicable |
| Current | 6.1-5.8 A |
| Airflow @ 0.100 in SP | Not Applicable |
| Airflow @ 3.000 in SP | Not Applicable |
| Flange Size | Not Applicable |
| Nominal Voltage | 208-230V AC |
| Airflow @ 6.000 in SP | Not Applicable |
| Flange Type | Non-Flanged |
| High-Efficiency Motor | Yes |
| Nameplate Voltage | 208-230V AC |
| Airflow @ 0.400 in SP | Not Applicable |
| Wheel Dimensions | 10 5/8 in Dia. x 10 3/8 in W |
| Outlet Size | 11 1/2 in x 13 in |
| Outlet Diameter | Not Applicable |
| Airflow @ Static Pressures | 2,200 cfm @ 1.000 in SP |
| Airflow @ 0.500 in SP | Not Applicable |
| Airflow @ 0.125 in SP | Not Applicable |
| Inlet Type | Dual-Inlet |
| Flange Type_broad | Outlet |
| Maximum Static Pressure | 1 1/4 in wc |
| Motor Speed | 1,075 RPM |
| Airflow @ 2.500 in SP | Not Applicable |
| Motor Frame Designation | 48YZ |
| Airflow @ 0.250 in SP | Not Applicable |
| Includes Motor | Yes |
| Mount Type | Multiposition |
| Airflow @ 0.375 in SP | Not Applicable |
| Airflow @ 3.500 in SP | Not Applicable |
| Airflow @ 0.000 in SP | Not Applicable |
| Motor Insulation Class | B |
| Wheel Type | Forward-Curved |
| Outlet Width | 13 in |
| Housing Material Finish | Galvanized |
| Outlet Shape_broad | Rectangular |
| Wheel Diameter | 10 5/8 in |
| Airflow @ 8.000 in SP | Not Applicable |
| Resistance Properties | Corrosion Resistant |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Blower, 10-5/8 In, 208-230 V, 2020 CFM, DAYTON, Mfr# 7HL65
$405,99
Free shipping will be applied on orders over $50
Blower with Motor, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Unassembled, Wheel Diameter 10 5/8 in, Airflow @ 0.000 in SP Not Applicable, Airflow @ 0.100 in SP Not Applicable, Airflow @ 0.125 in SP Not Applicable, Airflow @ 0.250 in SP Not Applicable, Airflow @ 0.375 in SP Not Applicable, Airflow @ 0.400 in SP Not Applicable, Airflow @ 0.500 in SP Not Applicable, Airflow @ 1.000 in SP 2,200 cfm, Airflow @ 1.250 in SP 1,555 cfm
9999 in stock
Must order in multiples of 1
Subtotal:
$405.99
You must be logged in to post a review.
Reviews
There are no reviews yet.