| Chemical Metering Pump Type | Peristaltic |
| Flow Rate Output Control | Variable |
| Voltage | 120 |
| Max. Flow (gpd) - Pumps | 60.00 gpd |
| Max. Pressure - Pumps | 25 psi |
| Voltage - Pumps | 120V AC |
| Phase - Pumps | 1 |
| Max. Viscosity - Pumps | 1,500 cps |
| HP - Pumps | 1/16 hp |
| Turn Down Ratio - Pumps | 100:1 |
| Reproducibility - Pumps | +/-2.0% |
| Height | 7 13/64 in |
| Suction Lift | 25 ft |
| Min. Flow Rate | 0.6 gpd |
| Max. Flow Rate | 60 gpd |
| Item | Chemical Metering Pump |
| Motor RPM | 2,800 RPM |
| Includes | 20 ft Roll of Suction/Discharge Tubing, Pump Tube, Injection Fitting, Mounting Bracket, Weighted Suction Line Strainer, (2) Additional Latches, (3) Connecting Nuts, (3) 1/4 in Ferrules |
| Self-Priming | Yes |
| Reproducibility | +/-2.0% |
| Head and Fitting Material - Pumps | Polycarbonate/PVC |
| Flow Rate | 0.042 gpm/0.158Lpm |
| Motor HP | 1/16 |
| Cord Length | 6 ft |
| Length | 11 in |
| Tubing Material - Peristaltic Pumps | Versilon |
| Turn Down Ratio | 100:1 |
| Pump RPM | 45 RPM |
| Hz | 60 |
| Number of Feeds | Single Head |
| Item - Chemical Metering Pumps | Chemical Metering Pump |
| Features | 7 days/24 hr Timer, Leak Detect, Performance Indicators Tube Change, Various Operation Modes |
| Max. Viscosity | 1500 CPS |
| Tubing Material | Santoprene |
| Width | 5 29/32 in |
| Phase | Single |
| Body Material | Polycarbonate |
| Max. Pressure | 25 psi |
| Seals and O-Rings - Pumps | Buna-N |
| Standards | IAPMO Listed Conforms to Standard NSF/ANSI 61 and 372, INTERTEK/ETL Sanitation Listed Conforms to Standard NSF/ANSI 50, INTERTEK/ETL Tested for CE, NEMA 4X |
| Pump Type | Peristaltic |
| Motor Mounting Type | Not Applicable |
| Frequency | 60 Hz |
| Overall Height | 7 in |
| Discharge Connection Size | 1/4 in |
| Intake Connection Type | Tube |
| Manufacturers Warranty Length | 2 yr |
| Head Material | Polyethylene, Polypropylene |
| Housing Material | Polycarbonate |
| Ambient Temperature (Maximum) | 104 Degrees F |
| Overall Length | 6.4 in |
| Motor Type | Brushless DC |
| Intake Connection Size | 1/4 in |
| Viscosity (Maximum) | 1,500 cps |
| Fitting Material | Polypropylene, PVC |
| Seal Material | Buna-N |
| Electrical Connection Type | Plug-In |
| Roller Material | Polyethylene |
| Chemical Compatibility | Ammonium Hydroxide, Antifreeze, Hydrochloric Acid 10%, Hydrochloric Acid 20%, Hydrochloric Acid 30%, Phosphoric Acid 100%, Phosphoric Acid 40%, Phosphoric Acid 50%, Phosphoric Acid 60%, Phosphoric Acid 70%, Phosphoric Acid 80%, Phosphoric Acid 90%, Potassium Hydroxide 50%, Sodium Hydroxide 20%, Sodium Hypochlorite 10%, Sodium Hypochlorite 5%, Sulfuric Acid 10%, Sulfuric Acid 20%, Sulfuric Acid 30%, Sulfuric Acid 40%, Water |
| Metering Reproducibility | +/-2.0% |
| Priming | Self-Priming |
| Motor Enclosure | Totally Enclosed |
| Motor Speed (Maximum) | 45 RPM |
| Max. Discharge Pressure | 25 psi |
| Flow Rate (Minimum) | 0.6 gpd |
| Overall Width | 10.9 in |
| Discharge Connection Type | Tube |
| Media Temp. Range | 32 Degrees F to 104 Degrees F |
| Degassing Valve Included | No |
| Media Temperature (Minimum) | 32 Degrees F |
| Flow Rate (Maximum) | 60 gpd |
| Nameplate Voltage | 120V AC |
| Control Programs | 4-20 mA Input, 7 Day/24 Hour Timer, Cycle Timer, Hall Effect Flow Sensor, Manual Control |
| Pressure (Maximum) | 25 psi |
| Media Temperature (Maximum) | 104 Degrees F |
| Duty Cycle | Continuous |
| Horsepower (Maximum) | 1/16 hp |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
S Series S3004 Variable Speed 60 GPD 25Psi, STENNER, Mfr# S3004AA101N
$1220,99
Free shipping will be applied on orders over $50
Chemical Metering Pump
9999 in stock
Must order in multiples of 1
Subtotal:
$1220.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.