| Motor Design | Permanent Split Capacitor |
| Phase | Single |
| HP | 1/3 |
| RPM Range | 1,001-1,100 |
| No. of Speeds | 2 |
| Voltage | 460V AC |
| Motor Shaft Rotation | CW/CCW |
| Frame | 48Y |
| Motor Enclosure Design | Open Air-Over |
| Motor Mounting Type | Stud |
| Shaft Dia. | 1/2 in |
| Max. Ambient Temp. | 60 Degrees C |
| Lead Length | 27 in |
| Duty | Continuous |
| Item | Direct Drive Blower Motor |
| Body Dia. | 5 5/8 in |
| Standards | CSA Certified, UL Recognized |
| Ins. Class | B |
| Motor Thermal Protection | Auto |
| Motor Bearings | Ball |
| Full Load Amps | 1.2 A |
| Voltage Compatibility | 200-230/440V AC, 200-230/460V AC, 208-220/440V AC, 208-230/460V AC, 220-230/460V AC, 220/460V AC, 230/460/796V AC, 230/460V AC, 440-460V AC, 460/796V AC, 460V AC |
| Motor Application | HVAC/R |
| Nominal Efficiency | 61 % |
| Features | Extended Studs Shaft End, Hex Mounting Hub on Both Ends, Thermally Protected |
| Length Less Shaft | 5 1/2 in |
| Motor Mounting Position | All Angle |
| Capacitor Required | Included |
| Nameplate RPM | 1,075 |
| Stud Size | #8-32 |
| Shaft Length | 6 7/16 in |
| Motor Sub Application | Condenser Fan |
| Stud Quantity | 4 |
| Hz | 60 Hz |
| Motor Service Factor | 1 |
| Overall Length | 11 15/16 in |
| Mounting Stud Pattern | 3 5/8 in x 3 5/8 in |
| Motor Shaft Design | Double-Flat |
| Bolt Circle Dia. | 5 3/16 in |
| Mounting Stud Length | 1 5/8 in |
| Resilient Ring Dia. | Not Applicable |
| Duty Cycle | Continuous |
| Weight | 15 lb |
| Output Watts | 250 W |
| Motor Frame Material | Steel |
| Usable @ 208V | No |
| Usable @ 200V | No |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |
Condenser Fan Motor, 1/3 HP, 1075 rpm, 60Hz, CENTURY, Mfr# BDH1036
$269,99
Free shipping will be applied on orders over $50
Direct Drive Blower Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/3 HP, Nameplate RPM 1,075, No. of Speeds 2, Voltage 460V AC, 1.2 A Full Load Amps, 48Y Frame, Output Watts 250 W, 60 Hz Hz, Usable @ 208V No, Usable @ 200V No, Motor Service Factor 1, Motor Thermal Protection Auto, Ins. Class B, Duty Cycle Continuous, Max. Ambient Temp. 60 Degrees C, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Open Air-Over, Motor Mounting Type Stud, Motor Frame Material Steel
9999 in stock
Must order in multiples of 1
Subtotal:
$279.35
You must be logged in to post a review.
Reviews
There are no reviews yet.