Item | Instant Adhesive |
Consistency | Thin Liquid |
Application | Overhead/Vertical Application,Repairing |
Materials Bonded | Metal, Plastic, Rubber |
Container Size | 0.7 fl oz |
Container Type | Tube |
Working Time | 15 sec |
Begins to Harden | 15 sec. |
Color | Clear |
VOC Content Weight | 20 g/L |
Series | 454 |
Specific Gravity | 1.05 |
Characteristics | Fixture Fast Fixture,General Purpose,Tensile Strength High Tensile Strength,Viscosity High Viscosity |
Viscosity | Gel |
Functional Cure | Not Specified |
VOC Content | 20g/L |
Adheres To | For Difficult to Bond Surfaces, Use on Porous Substrates, Irregular Rough and Acidic Surfaces |
Chemical Type | Cyanoacrylate |
Size | 20g |
Full Cure | 24 hr |
Gap Fill | 0.01 in |
Tensile Strength | 2,190 psi |
Temp. Range | -40.0 °F - 250.0 °F |
Standards | 29 CFR 1910.1200, A-A-3097, CFIA |
Low Odor | No |
VOC Content Weight Percentage | 2 % |
Shear Strength | 3,030 psi |
Compatible Accelerator | Loctite SF 712 |
Minimum Viscosity | 150 cps |
Water Resistance | Not Water-Resistant |
Interior/Exterior | Interior Only |
Built-in Dispenser Type | No Dispenser/Applicator |
Maximum Performance Temperature | 250 Degrees F |
Maximum Application Temperature | 250 Degrees F |
Cure Method | Humidity |
Maximum Viscosity | 450 cP |
Electrically Insulating | Yes |
Minimum Application Temperature | -65 Degrees F |
Features | Non-Wicking, Specially Suited to Porous Materials |
Impact Resistant | No |
Product Form | Gel |
Viscosity - Adhesives | 150 to 450 cPs |
Application method | Dispense System,Manual |
Gap fill | 0.25 mm |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Construction Adhesive, 454 Series, White, 9 oz, Cartridge
$16.51
Free shipping will be applied on orders over $50
Instant Adhesive, Adhesive Color Clear, Container Size 0.7 fl oz, Container Type Tube, Cure Method Humidity, Maximum Viscosity 450 cP, Minimum Viscosity 150 cps, Series 454, Built-in Dispenser Type No Dispenser/Applicator, Compatible Accelerator Loctite SF 712, Features Non-Wicking, Specially Suited to Porous Materials, Materials Bonded Metal, Plastic, Rubber, Primary Applications Plastics, Standards 29 CFR 1910.1200, A-A-3097, CFIA, Electrically Insulating Yes, Gap Fill 0.01 in
9999 in stock
Subtotal:
$16.51
You must be logged in to post a review.
Reviews
There are no reviews yet.