| Item | Rigid Shaft Coupling |
| Shaft Locking Type - Couplings | 2 Piece Clamp |
| System of Measurement | Metric |
| Bore Dia. | 14 mm |
| Material - Couplings | Stainless Steel |
| Outside Dia. | 34 mm |
| Overall Length | 50 mm |
| With Keyway / Without Keyway | With Keyway |
| Finish | Bright |
| Screw Size | M5 |
| Clearance Dia. (mm) | 39.40 |
| Max. Torque (In.-Lbs.) | 1400 |
| Keyway Width | 5 mm |
| Machined From | Bar Stock |
| Type | Two Piece Clamp Type, with Keyway |
| Item - Rigid Shaft Couplings | Rigid Shaft Coupling |
| Application | For Applications where Alignment is Critical, Particularly when no Backlash is Desired and Flexibility is not Required, Useful when Timing, Joining and/or Aligning Shafts at Lower Speeds and Torque |
| Design | Four Vibration Resistant Socket Capscrews |
| Keyway Width (mm) | 5 |
| Material | Stainless Steel |
| Clearance Dia. | 39.4 mm |
| Screw Size (mm) | M5 |
| Provides | Extra Holding Power for Higher Load Applications without Marring Shafts |
| Max. Torque | 1,400 in-lb |
| Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS3 Compliant |
| Screw Material | Stainless Steel |
| Bore Tolerance | +0.050 mm / +0.012 mm |
| Number of Locking Screws | 8 |
| Shaft Tolerance | +0.000 mm / -0.013 mm |
| Screw Material Grade | 18-8 300 Series |
| Keyway Width 2 | 5 mm |
| Fastener Tightening Torque | 5.4 N-m |
| Keyway Depth 2 | 2.4 mm |
| Coupling Material | Stainless Steel |
| Bore Type | Round Keyed |
| Keyway Width 1 | 5 mm |
| Screw Thread Size | M5 |
| Coupling Material Finish | Bright |
| Coupling Material Grade | 303 |
| Coupling Outside Diameter | 34 mm |
| Bore Diameter 2 | 14 mm |
| Minimum Operating Temperature | -40 Degrees C |
| Coupling Construction | Two-Piece |
| Shaft Locking Type | Clamp On |
| Features | Precision Honed Bores, Vibration-Resistant Screws |
| Zero Backlash | Yes |
| Minimum Bore Diameter | 14 mm |
| Recommended Gap | 1.6 mm |
| Screw Material Finish | Bright |
| Resistance Properties | Corrosion Resistant |
| Maximum Torque | 60 N-m |
| Screw Location from Center | 12 mm |
| Maximum Speed | 4,000 RPM |
| Maximum Bore Diameter | 14 mm |
| Maximum Operating Temperature | 176 Degrees C |
| Different Bore Sizes | No |
| Keyway Depth 1 | 2.4 mm |
| Clearance Diameter | 39.4 mm |
| Included Screws | (8) Clamp Screws |
| Bore Diameter 1 | 14 mm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Coupling, Two Piece, Bore Dia 14 mm, RULAND, Mfr# MSPC-14-14-SS
$142.58
Free shipping will be applied on orders over $50
Rigid Shaft Coupling, Bore Diameter 1 14 mm, Bore Diameter 2 14 mm, Bore Type Round Keyed, Clearance Diameter 39.4 mm, Coupling Construction Two-Piece, Coupling Material Stainless Steel, Coupling Outside Diameter 34 mm, Different Bore Sizes No, Keyway Depth 1 2.4 mm, Keyway Depth 2 2.4 mm, Minimum Bore Diameter 14 mm, Keyway Width 1 5 mm, Keyway Width 2 5 mm, Maximum Bore Diameter 14 mm, Maximum Speed 4,000 RPM, Maximum Torque 60 N-m, Overall Length 50 mm, Shaft Locking Type Clamp On
9999 in stock
Must order in multiples of 1
Subtotal:
$142.58
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.