| Item - Jaw Coupling Hubs | Curved Jaw Coupling Hub |
| Size - Jaw Couplings | MJS15 |
| Bore Dia. | 4 mm |
| Keyway Size Type | None |
| Material - Hubs | Aluminum |
| Outside Dia. | 15 mm |
| Assembled Coupling Length | 21.8 mm |
| Material | Aluminum |
| Size | MJS15 |
| Overall Length | 21.8 mm |
| Keyway Size | None |
| Item | Jaw Coupling Hub |
| Hub Diameter | 15 mm |
| Hub Material Finish | Bright |
| Fail Safe | Yes |
| Coupling Overall Length | 21.8 mm |
| Jaw Profile | Curved |
| Minimum Operating Temperature | -23 Degrees C |
| Shaft Locking Type | Set Screw |
| Bore Diameter | 4 mm |
| Hub Material | Aluminum |
| Keyway Width | Not Applicable |
| Weight | 0 lb |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015, REACH Compliant, RoHS Compliant |
| Maximum Operating Temperature | 82 Degrees C |
| Included Screws | Set Screw |
| Keyway Depth | Not Applicable |
| Hub Material Grade | 2024 |
| System of Measurement | Metric |
| Hub Projection | 7.6 mm |
| Recommended Hub Gap | 0.5 mm |
| Full Bearing Support Required | Yes |
| Screw Material Finish | Black Oxide |
| Outside Diameter | 15 mm |
| Bore Type | Round Bore |
| Screw Material | Alloy Steel |
| Shaft Tolerance | +0.000/-0.013 mm |
| Number of Locking Screws | 1 |
| Bore Tolerance | +0.05/-0.00 mm |
| Maximum Speed | 8,000 RPM |
| Length through Bore | 7.6 mm |
| Screw Thread Size | M3 |
| Zero Backlash | Yes |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Jaw Coupling Hub, 4mm, Aluminum, RULAND, Mfr# MJS15-4-A
$16.15
Free shipping will be applied on orders over $50
Jaw Coupling Hub, Coupling Size MJS15, Outside Diameter 15 mm, Coupling Overall Length 21.8 mm, System of Measurement Metric, Hub Material Aluminum, Maximum Speed 8,000 RPM, Keyway Depth Not Applicable, Keyway Width Not Applicable, Bore Diameter 4 mm, Shaft Locking Type Set Screw, Bore Type Round Bore, Jaw Profile Curved, Screw Thread Size M3, Bore Tolerance +0.05/-0.00 mm, Fail Safe Yes, Shaft Tolerance +0.000/-0.013 mm, Full Bearing Support Required Yes, Hub Diameter 15 mm
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.