| Chemical Metering Pump Type | Diaphragm |
| Flow Rate Output Control | Adjustable |
| Voltage | 115 |
| Max. Flow (gpd) - Pumps | 24.00 gpd |
| Max. Pressure - Pumps | 100 psi |
| Diaphragm Material | CSPE, PTFE |
| Voltage - Pumps | 115V AC |
| Phase - Pumps | 1 |
| Max. Viscosity - Pumps | 1,000 cps |
| HP - Pumps | 1/5 hp |
| Turn Down Ratio - Pumps | 100:1 |
| Reproducibility - Pumps | +/-2.0% |
| Self-Priming | Yes |
| Pump Type | Diaphragm |
| Width | 5 in |
| cc/Min. | 64 cc/min |
| Tubing Material | PVC/Polyethylene |
| Head and Fitting Material - Pumps | GFPPL |
| Body Material | Chemical Resistant Resin |
| Max. Flow (GPD) - Pumps | 24.00 gpd |
| Features | Solenoid Drive, Stroke Length and Speed Adjustment |
| Hz | 50/60 |
| Length | 11 in |
| Max. Viscosity | 1000 cps |
| Reproducibility | +/-2.0% |
| Turn Down Ratio | 100:1 |
| Ball Material - Pumps | Ceramic |
| Min. Flow Rate | 0.24 gpd |
| Cord Length | 6 ft |
| Max. Pressure | 100 psi |
| Item - Chemical Metering Pumps | Chemical Metering Pump |
| Max. Flow Rate | 24 gpd |
| Max. Strokes per Minute | 125 stroke/min |
| Includes | 1/2 in NPT Injection/Back Pressure Valve, Bleed Valve, Foot Valve/Strainer, Tube |
| Seals and O-Rings | PTFE |
| Standards | CE Certified, ETL, ETL Sanitation, NSF 61 Certified |
| Number of Feeds | 1 |
| Ball Material | Ceramic |
| Suction Lift | 4 ft |
| Height | 11 in |
| Head and Fitting Material | GFPPL |
| Phase | Single |
| Seals and O-Rings - Pumps | PTFE |
| Item | Chemical Metering Pump |
| Body Material - Pumps | Resin |
| Overall Length | 10.7 in |
| Overall Width | 5.4 in |
| Overall Height | 10.6 in |
| Pump Drive Type | Solenoid |
| Chemical Compatibility | Ammonium Hydroxide, Calcium Carbonate, Hydrochloric Acid 10%, Hydrochloric Acid 20%, Hydrochloric Acid 30%, Hydrochloric Acid 40%, Phosphoric Acid 40%, Potassium Hydroxide 50%, Sodium Hydroxide 20%, Sodium Hydroxide 50%, Sodium Hydroxide 80%, Sulfuric Acid 10%, Water |
| Head Material | Glass-Filled Polypropylene |
| Media Temperature (Maximum) | 104 Degrees F |
| Discharge Connection Type | Tube |
| Stroke Rate (Maximum) | 125 stroke/min |
| Horsepower (Maximum) | 1/5 hp |
| Viscosity (Maximum) | 1,000 cps |
| Fitting Material | Glass-Filled Polypropylene |
| Frequency | 60 Hz |
| Flow Rate (Maximum) | 24 gpd |
| Intake Connection Size | 3/8 in |
| Check Ball Material | Ceramic |
| Housing Material | Resin |
| Degassing Valve Included | No |
| Flow Rate (Minimum) | 0.24 gpd |
| Motor Thermal Protection | Auto |
| Seal Material | PTFE |
| Nameplate Voltage | 115/230V AC |
| Operating Pressure (Maximum) | 100 psi |
| Control Programs | Manual Control |
| Duty Cycle | Continuous |
| Priming | Self-Priming |
| Discharge Connection Size | 3/8 in |
| Intake Connection Type | Tube |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Metering Pump, 1000 CPS115V, 6 ft.Ceramic, PULSATRON, Mfr# LPB4SA-PTC1-G19
$995.21
Free shipping will be applied on orders over $50
Chemical Metering Pump, Chemical Compatibility Ammonium Hydroxide, Calcium Carbonate, Hydrochloric Acid 10 Percent, Hydrochloric Acid 20 Percent, Hydrochloric Acid 30 Percent, Hydrochloric Acid 40 Percent, Phosphoric Acid 40 Percent, Potassium Hydroxide 50 Percent, Sodium Hydroxide 20 Percent, Sodium Hydroxide 50 Percent, Sodium Hydroxide 80 Percent, Sulfuric Acid 10 Percent, Water, Control Programs Manual Control, Diaphragm Material CSPE, PTFE, Discharge Connection Size 3/8 in
9999 in stock
Must order in multiples of 1
Subtotal:
$995.21
You must be logged in to post a review.
Reviews
There are no reviews yet.