| Chemical Metering Pump Type | Diaphragm |
| Flow Rate Output Control | Adjustable |
| Voltage | 115 |
| Max. Flow (gpd) - Pumps | 15.00 gpd |
| Max. Pressure - Pumps | 100 psi |
| Diaphragm Material | CSPE, PTFE, Viton |
| Voltage - Pumps | 115V AC |
| Phase - Pumps | 1 |
| Max. Viscosity - Pumps | 300 cps |
| HP - Pumps | 1/60 hp |
| Turn Down Ratio - Pumps | 10:1 |
| Reproducibility - Pumps | +/-5.0% |
| Min. Flow Rate | 1.5 gpd |
| Pump Type | Diaphragm |
| Phase | Single |
| Ball Material | Ceramic |
| Max. Flow Rate | 15 gpd |
| Max. Strokes per Minute | 25 stroke/min |
| Number of Feeds | 1 |
| Height | 9 in |
| Item | Chemical Metering Pump |
| Max. Pressure | 100 psi |
| Head and Fitting Material | PVC |
| Seals and O-Rings | CSPE |
| Body Material - Pumps | Styrene Acrylonitrile |
| cc/Min. | 39 cc/min |
| Includes | Bleed Valve, Foot Valve Strainer with Weight, Injection Back Pressure Valve, Tube |
| Standards | cETLus Listed, ETL |
| Reproducibility | +/-5.0% |
| Seals and O-Rings - Pumps | CSPE |
| Hz | 60 |
| Features | Adjustable Output Via Stroke Length |
| Max. Viscosity | 300 cps |
| Ball Material - Pumps | Ceramic |
| Head and Fitting Material - Pumps | PVC |
| Tubing Material | PVC/Polyethylene |
| Width | 7 3/8 in |
| Motor HP | 1/60 |
| Motor RPM | 25 RPM |
| Cord Length | 6 ft |
| Turn Down Ratio | 10:1 |
| Suction Lift | 4 ft |
| Self-Priming | Yes |
| Length | 8 7/8 in |
| Body Material | Styrene Acrylonitrile |
| Item - Chemical Metering Pumps | Chemical Metering Pump |
| Duty Cycle | Continuous |
| Media Temperature (Maximum) | 104 Degrees F |
| Operating Pressure (Maximum) | 100 psi |
| Stroke Rate (Maximum) | 25 stroke/min |
| Fitting Material | PVC |
| Housing Material | Styrene Acrylonitrile |
| Priming | Self-Priming |
| Intake Connection Type | Tube |
| Horsepower (Maximum) | 1/60 hp |
| Head Material | PVC |
| Overall Length | 8.8 in |
| Overall Height | 7.3 in |
| Motor Speed (Maximum) | 25 RPM |
| Viscosity (Maximum) | 300 cps |
| Control Programs | Manual Control |
| Nameplate Voltage | 115V AC |
| Discharge Connection Size | 1/2 in |
| Overall Width | 7.4 in |
| Check Ball Material | Ceramic |
| Chemical Compatibility | Ammonium Hydroxide, Calcium Carbonate, Hydrochloric Acid 10%, Hydrochloric Acid 20%, Hydrochloric Acid 30%, Hydrochloric Acid 40%, Phosphoric Acid 40%, Potassium Hydroxide 50%, Sodium Hydroxide 20%, Sodium Hydroxide 50%, Sodium Hydroxide 80%, Sulfuric Acid 10%, Water |
| Seal Material | CSPE |
| Flow Rate (Minimum) | 1.5 gpd |
| Intake Connection Size | 1/2 in |
| Discharge Connection Type | Tube |
| Flow Rate (Maximum) | 15 gpd |
| Degassing Valve Included | No |
| Pump Drive Type | Electric Motor |
| Frequency | 60 Hz |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Metering Pump, 8 gpd, 125 PSI, CHEM-TECH, Mfr# X015-XA-AAAAG19
$427.76
Free shipping will be applied on orders over $50
Chemical Metering Pump, Chemical Compatibility Ammonium Hydroxide, Calcium Carbonate, Hydrochloric Acid 10 Percent, Hydrochloric Acid 20 Percent, Hydrochloric Acid 30 Percent, Hydrochloric Acid 40 Percent, Phosphoric Acid 40 Percent, Potassium Hydroxide 50 Percent, Sodium Hydroxide 20 Percent, Sodium Hydroxide 50 Percent, Sodium Hydroxide 80 Percent, Sulfuric Acid 10 Percent, Water, Control Programs Manual Control, Diaphragm Material CSPE, PTFE, Viton, Discharge Connection Size 1/2 in
9999 in stock
Must order in multiples of 1
Subtotal:
$427.76
You must be logged in to post a review.
Reviews
There are no reviews yet.