| Housing Material - Pumps | Polypropylene |
| Diaphragm Material - Pumps | Santoprene(R) |
| Max. Flow | 280 gpm |
| Item - Air Operated Pumps | Double Diaphragm Pump |
| Pump Operation Type | Air |
| Max. Temp - Pumps | 180 Degrees F |
| Inlet/Outlet Size | 3 in |
| Connection Style | Flange |
| Air Inlet Size | 3/4 in FNPT |
| Agency Compliance | EN 809 |
| Max. Dia. Solids | 3/4 in |
| Max. Flow GPM | 280 gpm |
| Manifold Connection | Single Port |
| Check Seat Material | Polypropylene |
| Valve Type | Ball |
| Item | Double Diaphragm Pump |
| Diaphragm Material | Santoprene |
| Manufacturers Warranty Length | 5 yr |
| Ball Material | Santoprene(R) |
| Standards | ABS Type Approved, CE Certified, EAC, ISO |
| Max. Operating Pressure | 100 psi |
| Pump Assembly Type | Bolt |
| Flow Rate @ 60 psi | 242.2 gpm |
| Media Discharge Size | 3 in |
| Manifold Connection Type | Flange |
| Media Intake Connection Size | 3 in |
| Media Temperature (Minimum) | -40 Degrees F |
| Feet of Head (Maximum) | 231 ft |
| Solid Diameter (Maximum) | 0.75 in |
| Air Intake Connection Type | Flange |
| Flow Rate @ 100 psi | 276.1 gpm |
| Valve Material | Santoprene |
| Flow Rate @ 10 psi | Not Applicable |
| Flow Rate @ 70 psi | Not Applicable |
| Flow Rate @ 30 psi | Not Applicable |
| Air Intake Connection Size | 3/4 in |
| Air Intake Pressure (Maximum) | 100 psi |
| For Use With Potable Systems | No |
| Fluid Intake Connection | 3 in Flange |
| Air Consumption (Maximum) | 150 scfm |
| Housing Material | Polypropylene |
| Flow Rate @ 50 psi | Not Applicable |
| Fluid Connection Size | 3 in |
| Valve Material | Santoprene |
| Series Family | S30 |
| Flow Rate (Maximum) | 280 gpm |
| Media Discharge Location | Center, Top |
| Flow Rate @ 90 psi | Not Applicable |
| Media Temperature (Maximum) | 180 Degrees F |
| Media Intake Type | Flange |
| Media Intake Size | 3 in |
| Priming | Self-Priming |
| Media Discharge Connection Size | 3 in |
| Operating Pressure (Maximum) | 100 psi |
| Flow Rate @ 15 psi | Not Applicable |
| Wetted Housing Material | Polypropylene |
| Flow Rate @ 20 psi | 164.3 gpm |
| Media Intake Location | Bottom, Center |
| Port Location | Bottom Top, Center Center, Center Top |
| Fluid Connection Type | Flange |
| Media Intake Connection Type | Flange |
| Flow Rate @ 80 psi | 260.5 gpm |
| Fluid Discharge Connection | 3 in Flange |
| Air Inlet | 3/4 in Flange |
| Chemical Compatibility | Ammonium Hydroxide, Calcium Carbonate, Hydrochloric Acid 10%, Hydrochloric Acid 20%, Hydrochloric Acid 30%, Phosphoric Acid 40%, Phosphoric Acid 50%, Potassium Hydroxide 50%, Sodium Hydroxide 10%, Sodium Hydroxide 20%, Sodium Hydroxide 50%, Sodium Hydroxide 80%, Sulfuric Acid 10%, Sulfuric Acid 20%, Sulfuric Acid 30%, Sulfuric Acid 40%, Sulfuric Acid 50%, Sulfuric Acid 60%, Sulfuric Acid 70%, Sulfuric Acid 80%, Water |
| Media Discharge Connection Type | Flange |
| Media Discharge Type | Flange |
| Non-Wetted Housing Material | Polypropylene |
| Flow Rate @ 40 psi | 214.6 gpm |
| Flow Rate @ 120 psi | Not Applicable |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Dbl DphrmPmp, Flange, TPV/PP, 3/4in, 280gpm, SANDPIPER, Mfr# S30B3P1PPAS000.
$9503,99
Free shipping will be applied on orders over $50
Double Diaphragm Pump, Air Consumption (Maximum) 150 scfm, Air Intake Connection Size 3/4 in, Air Intake Connection Type Flange, Check Seat Material Polypropylene, Diaphragm Material Santoprene, Feet of Head (Maximum) 231 ft, Flow Rate (Maximum) 280 gpm, Manifold Connection Single Port, Media Discharge Connection Size 3 in, Media Discharge Connection Type Flange, Media Discharge Location Center, Top, Media Intake Connection Size 3 in, Media Intake Connection Type Flange
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.