| Property | Value |
|---|---|
| Promotion Restriction | Not eligible for promotion |
| Self-Priming | Yes |
| Max. Suction Lift | 26 ft |
| Width | 14-1/2 |
| Item | Engine Driven Utility Pump |
| Impeller Type | Open |
| Tank Capacity | 0.53 gal |
| Engine RPM | 3800 |
| GPM of Water @ 40 Ft. of Head | 100 |
| Engine Size | 118 cc |
| Material of Construction | Aluminum |
| Check Valve | Buna N |
| GPM of Water @ 10 Ft. of Head | 141 |
| GPM of Water @ 80 Ft. of Head | 28 |
| GPM of Water @ 50 Ft. of Head | 84 |
| Engine Brand | Honda |
| Height | 16-1/2 |
| Seal Material | Silicon Carbide |
| Inlet | 2 in NPT |
| GPM of Water @ 20 Ft. of Head | 131 |
| Volute/Wear Plate | Cast Iron |
| GPM of Water @ 90 Ft. of Head | 8 |
| Application | General Purpose |
| Sensor Type | Low Oil |
| Number of Impellers | 1 |
| Length | 18 |
| GPM of Water @ 30 Ft. of Head | 116 |
| Engine/Motor Type | Gas |
| Roll Bar Frame | Steel |
| Outlet | 2 |
| Max. Head | 105 ft |
| GPM of Water @ 60 Ft. of Head | 67 |
| Max. Pressure | 40 psi |
| Impeller Material | Cast Iron |
| Ignition Type | Recoil-Start |
| Temp. Range | 0 Degrees to 130 Degrees F |
| GPM of Water @ 70 Ft. of Head | 48 |
| Mechanical Seal | Silicon Carbide |
| Volute Material | Cast Iron |
| Discharge Gender | Male |
| Max. Diameter Solids | 3/8 in |
| Flow Rate @ 80 Ft. of Head | 28 gpm |
| Pump Mechanism | Centrifugal |
| Inlet Gender | Male |
| Flow Rate @ 20 Ft. of Head | 131 gpm |
| Power Source | Gas |
| Flow Rate @ 40 Ft. of Head | 100 gpm |
| Discharge | 2 in MNPT |
| Inlet Dia. | 2 in |
| Discharge Standard | NPT |
| RPM | 3,800 RPM |
| Max. Liquid Temp. | 130 Degrees F |
| Body Material | Aluminum |
| HP | 3 1/2 hp |
| Overall Width | 14 1/2 in |
| Overall Length | 18 in |
| Frame Material | Steel |
| Impeller Design | Open |
| Overall Height | 16 1/2 in |
| Flow Rate @ 10 Ft. of Head | 141 gpm |
| Maximum Discharge Pressure | 40 psi |
| Flow Rate @ 60 Ft. of Head | 67 gpm |
| Discharge Dia. | 2 in |
| Inlet Standard | NPT |
| Frame Design - Pumps | Full Tubular Frame |
| Country of Origin (subject to change) | Thailand |
| Package Quantity | 1 |
Engine Driven Pump, 118 cc, Honda, Mfr#: WB20XT4A
$569.99
Free shipping will be applied on orders over $50
Engine Driven Utility Pump, Engine Size 118 cc, HP 3 1/2 hp, Tank Capacity 0.53 gal, Ignition Type Recoil-Start, Pump Mechanism Centrifugal, Body Material Aluminum, Volute Material Cast Iron, Seal Material Silicon Carbide, Frame Material Steel, Flow Rate @ 10 Ft. of Head 141 gpm, Flow Rate @ 20 Ft. of Head 131 gpm, Flow Rate @ 40 Ft. of Head 100 gpm, Flow Rate @ 60 Ft. of Head 67 gpm, Flow Rate @ 80 Ft. of Head 28 gpm, Max. Head 105 ft, Max. Suction Lift 26 ft
9999 in stock
Subtotal:
$569.99
You must be logged in to post a review.
Restrictions:
Restrictions States: PR,
Reviews
There are no reviews yet.