| Property | Value |
|---|---|
| Promotion Restriction | Not eligible for promotion |
| Engine Brand | Honda |
| Ignition Type | Electronic |
| Roll Bar Frame | Steel |
| Impeller Type | Open |
| GPM of Water @ 20 Ft. of Head | 230 |
| Length | 20 |
| Volute/Wear Plate | Cast Iron |
| GPM of Water @ 70 Ft. of Head | 50 |
| Height | 18 |
| GPM of Water @ 30 Ft. of Head | 197 |
| Engine/Motor Type | Gas |
| Material of Construction | Cast Iron |
| Temp. Range | 0 Degrees to 130 Degrees F |
| Item | Engine Driven Utility Pump |
| Max. Head | 85 ft |
| GPM of Water @ 10 Ft. of Head | 253 |
| Outlet | 3 |
| Max. Pressure | 37 psi |
| Self-Priming | Yes |
| Max. Suction Lift | 26 ft |
| Engine RPM | 3750 |
| GPM of Water @ 40 Ft. of Head | 163 |
| GPM of Water @ 60 Ft. of Head | 90 |
| Width | 15 |
| Application | General Purpose |
| Tank Capacity | 0.82 gal |
| GPM of Water @ 50 Ft. of Head | 129 |
| Number of Impellers | 1 |
| GPM of Water @ 80 Ft. of Head | 10 |
| Seal Material | Silicon Carbide |
| Inlet | 3 in NPT |
| Sensor Type | Low Oil |
| Engine Size | 163 cc |
| Check Valve | Buna N |
| Mechanical Seal | Silicon Carbide |
| Impeller Material | Cast Iron |
| Max. Liquid Temp. | 130 Degrees F |
| Flow Rate @ 20 Ft. of Head | 235 gpm |
| Inlet Dia. | 3 in |
| Flow Rate @ 10 Ft. of Head | 265 gpm |
| Discharge Dia. | 3 in |
| Discharge Standard | NPT |
| Volute Material | Cast Iron |
| Flow Rate @ 40 Ft. of Head | 170 gpm |
| Max. Diameter Solids | 3/8 in |
| Power Source | Gas |
| Inlet Standard | NPT |
| Flow Rate @ 60 Ft. of Head | 95 gpm |
| Overall Length | 20 in |
| Frame Material | Steel |
| Discharge | 3 in MNPT |
| Body Material | Aluminum |
| Flow Rate @ 80 Ft. of Head | 20 gpm |
| Overall Width | 15 in |
| RPM | 3,750 RPM |
| Impeller Design | Open |
| Maximum Discharge Pressure | 37 psi |
| Pump Mechanism | Centrifugal |
| HP | 4 4/5 hp |
| Inlet Gender | Male |
| Discharge Gender | Male |
| Overall Height | 18 in |
| Frame Design - Pumps | Full Tubular Frame |
| Country of Origin (subject to change) | Thailand |
| Package Quantity | 1 |
Engine Driven Pump, 163 cc, Honda, Mfr#: WB30XT3
$763.99
Free shipping will be applied on orders over $50
Engine Driven Utility Pump, Engine Size 163 cc, HP 4 4/5 hp, Tank Capacity 0.82 gal, Ignition Type Electronic, Pump Mechanism Centrifugal, Body Material Aluminum, Volute Material Cast Iron, Seal Material Silicon Carbide, Frame Material Steel, Flow Rate @ 10 Ft. of Head 265 gpm, Flow Rate @ 20 Ft. of Head 235 gpm, Flow Rate @ 40 Ft. of Head 170 gpm, Flow Rate @ 60 Ft. of Head 95 gpm, Flow Rate @ 80 Ft. of Head 20 gpm, Max. Head 85 ft, Max. Suction Lift 26 ft
9999 in stock
Subtotal:
$763.99
You must be logged in to post a review.
Restrictions:
Restrictions States: PR,
Reviews
There are no reviews yet.