| Property | Value |
|---|---|
| Promotion Restriction | Not eligible for promotion |
| Volute/Wear Plate | Cast Iron/Stainless Steel |
| Engine Brand | Honda |
| Impeller Material | Cast Iron |
| Inlet | 4 in NPT |
| GPM of Water @ 30 Ft. of Head | 322 |
| Max. Pressure | 37 psi |
| Mechanical Seal | Silicon Carbide |
| Width | 21 |
| Material of Construction | Cast Iron |
| Engine/Motor Type | Gas |
| Length | 29 |
| Seal Material | Silicon Carbide |
| Engine RPM | 4000 |
| Engine Size | 389 cc |
| Application | Trash |
| GPM of Water @ 70 Ft. of Head | 110 |
| GPM of Water @ 10 Ft. of Head | 413 |
| Temp. Range | 0 Degrees to 130 Degrees F |
| Number of Impellers | 1 |
| GPM of Water @ 80 Ft. of Head | 50 |
| Sensor Type | Low Oil |
| Item | Engine Driven Utility Pump |
| Self-Priming | Yes |
| Max. Suction Lift | 26 ft |
| Outlet | 4 |
| Solids Handling Capacity | 1-1/16 |
| GPM of Water @ 50 Ft. of Head | 219 |
| Ignition Type | Recoil-Start |
| Impeller Type | Trash |
| Tank Capacity | 1.6 gal |
| Height | 22 |
| Max. Head | 82 ft |
| GPM of Water @ 60 Ft. of Head | 164 |
| Roll Bar Frame | Steel |
| GPM of Water @ 40 Ft. of Head | 268 |
| Check Valve | Buna N |
| GPM of Water @ 20 Ft. of Head | 372 |
| Discharge Gender | Male |
| Impeller Design | Open |
| Inlet Dia. | 4 in |
| Max. Liquid Temp. | 130 Degrees F |
| RPM | 4,000 RPM |
| Discharge | 4 in MNPT |
| Volute Material | Cast Iron/Stainless Steel |
| Flow Rate @ 20 Ft. of Head | 372 gpm |
| Discharge Standard | NPT |
| Inlet Standard | NPT |
| Overall Height | 22 in |
| Frame Material | Steel |
| Flow Rate @ 10 Ft. of Head | 413 gpm |
| Flow Rate @ 60 Ft. of Head | 164 gpm |
| Pump Mechanism | Centrifugal |
| Flow Rate @ 80 Ft. of Head | 50 gpm |
| Maximum Discharge Pressure | 37 psi |
| Max. Diameter Solids | 1-1/16 in |
| Overall Length | 29 in |
| HP | 11 7/10 hp |
| Flow Rate @ 40 Ft. of Head | 268 gpm |
| Overall Width | 21 in |
| Body Material | Aluminum |
| Discharge Dia. | 4 in |
| Inlet Gender | Male |
| Power Source | Gas |
| Frame Design - Pumps | Full Tubular Frame |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |
Engine Driven Trash Pump, 337 cc, Honda, Mfr#: WT40XK3A
$2863.99
Free shipping will be applied on orders over $50
Engine Driven Utility Pump, Engine Size 389 cc, HP 11 7/10 hp, Tank Capacity 1.6 gal, Ignition Type Recoil-Start, Pump Mechanism Centrifugal, Body Material Aluminum, Volute Material Cast Iron/Stainless Steel, Seal Material Silicon Carbide, Frame Material Steel, Flow Rate @ 10 Ft. of Head 413 gpm, Flow Rate @ 20 Ft. of Head 372 gpm, Flow Rate @ 40 Ft. of Head 268 gpm, Flow Rate @ 60 Ft. of Head 164 gpm, Flow Rate @ 80 Ft. of Head 50 gpm, Max. Head 82 ft, Max. Suction Lift 26 ft
9999 in stock
Subtotal:
$2863.99
You must be logged in to post a review.
Restrictions:
Restrictions States: PR,
Reviews
There are no reviews yet.