| Bearing Insert Type | Radial Ball |
| Bore Dia. | 1/2 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Pressed Steel |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 4 in |
| Series | F2PH-BL |
| Bolt Size | 7/16 in |
| Overall Height | 1.75 in |
| Housing Material | Steel |
| Dimension J | 7/16 in |
| Overall Width | 3 in |
| Dimension D | 3 in |
| Dimension B | 5 in |
| Locking Type | Set Screw |
| Overall Length | 5 in |
| Dimension F | 1 3/4 in |
| Dimension E | 4 in |
| Static Load Capacity | 1,479 lb |
| Temp. Range | -30 Degrees to 200 Degrees F |
| Dynamic Load Capacity | 2,877 lbf |
| Includes | (2) Set Screws |
| Dimension C | 4 in |
| Finish | Rustproof Plated |
| Item | 2 Bolt Flange Bearing |
| Dimension L | 1 3/4 in |
| Dimension H | 3/32 in |
| Standards | California Proposition 65, DFARS Compliant, ISO Certified, Reach Certified, RoHS 3 Certified, TOXIC SUBSTANCES CONTROL ACT SECTION |
| Maximum Misalignment Angle | 2 Degrees |
| Bore Type | Cylindrical |
| Housing Material Grade | 52100 |
| System of Measurement | Inch |
| Mounting Bolt Size | 7/16 in |
| Bore Diameter | 1/2 in |
| Resistance Properties | Non-Conductive |
| Mount Hole Center-to-Center Height | 4 in |
| Maximum Speed | 6,000 RPM |
| Lubrication Openings | One Zirc Fitting |
| Includes Mounting Hardware | Yes |
| Seal Material | Rubber |
| Housing Material Finish | Rustproof Plated |
| Maximum Temperature | 200 Degrees F |
| Minimum Temperature | -30 Degrees F |
| Bearing Material Grade | 52100 |
| Bore Diameter Tolerance | +0.0005 in, +0.001 in |
| Static Radial Load Capacity | 1,479 lbf |
| Mount Hole Size | 7/16 in |
| Number of Mount Holes | 2 |
| Mount Hole Center-to-Center Length | 4 in |
| Lubricant Material | NLGI #2 Equivalent |
| Features | Ball Bearing is Pre-Lubricated and Made to ABEC-1 Tolerance, Bearing Inserts are Encased in an Extra Thick, Non-Conductive Oil Resistant Rubber Liner Which Corrects upto a 2 Degrees Misalignment While Reducing Vibration and Noise, Heavy Gauge Pressed Steel One-Piece Housing has a Rust-Proof Plated Finish, Neoprene Seal Keeps Contaminants Out Allowing for Usage in Wet or Dry Conditions, Wide Inner Race Locks Securely to the Shaft with Two Set Screws |
| Housing Type | Rhombus |
| Closure | Double Sealed |
| Rolling Element Rows | 1 |
| Brand & Part Number | DAYTON 1A400 |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Flange Bearing, 2-Bolt, Ball, 1/2" Bore, DAYTON, Mfr# 1A400
$31.19
Free shipping will be applied on orders over $50
2 Bolt Flange Bearing, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1/2 in, Bore Type Cylindrical, Closure Double Sealed, Housing Material Steel, Housing Type Rhombus, Lubricant Material NLGI #2 Equivalent, Maximum Speed 6,000 RPM, Maximum Temperature 200 Degrees F, Minimum Temperature -30 Degrees F, Mount Hole Center-to-Center Height 4 in, Number of Mount Holes 2, Overall Height 1.75 in, Overall Length 5 in, Overall Width 3 in, Rolling Element Rows 1
9999 in stock
Must order in multiples of 1
Subtotal:
$31.19
You must be logged in to post a review.
Reviews
There are no reviews yet.