Item | DC Gearmotor |
Gearmotor Voltage | 90V DC |
Gearmotor Type | DC Gearmotor |
Max. Torque | 353 in-lb |
Gearmotor Shaft Type | Single |
Gearmotor Shaft Orientation | Parallel |
Nameplate RPM | 43 RPM |
Gearmotor Enclosure | Totally Enclosed Nonventilated |
Gearmotor Rotation | CW/CCW |
Length Less Shaft | 11.75 in |
Gearmotor Mounting Position | All Angle |
Full Load Amps | 2.7 A |
Standards | C-UL Recognized, UL Recognized |
Input HP | 1/4 |
Lubrication | Permanent Heavy Fluid Gear Oil |
Gear Ratio | 41:1 |
Rear Shaft Encoder/Pulse Generator Mounting | No |
Mounting | All Position |
Tachometer Feedback | No |
Thermal Protection | None |
Max. Ambient Temp. | 40 Degrees C |
Enclosure | TENV |
Rotation | CW/CCW |
Motor Type | Permanent Magnet DC |
Brushes | Externally Replaceable |
RPM Range | 31 to 50 |
Seals | Lip Type on Input and Output Shaft |
Shaft Length (Dimension V) | 1 1/2 in |
Shaft Dia. (Dimension U) | 3/4 in |
Voltage | 90VDC |
Replacement Brushes | 6YHY9 |
Overhung Load | 325 lb |
Gear Case | Die Cast Aluminum |
Gear Type | Helical (1st Stage), Spur (Subsequent Stages) |
Bearings | Ball on Motor, Heavy Duty Ball and Thrust Balls on Case |
Shaft Orientation | Parallel |
Overall Length | 13.25 in |
Gear Material | Hardened Steel |
Overall Width | 8.13 in |
Overall Height | 6.63 in |
Output Shaft Length | 1 1/2 in |
Operating Voltage | 90V DC |
Maximum Torque | 353 in-lb |
Mount Hole Center-to-Center Width | 7.13 in |
Keyway Width | 1/8 in |
Mount Hole Center-to-Center Length | 2.5 in |
Motor Enclosure | Totally Enclosed Nonventilated |
Replaceable Motor Brushes | Yes |
Bearing Type | Ball on Motor, Heavy Duty Ball and Thrust Balls on Case |
Mounting Orientation | Any Angle |
Nameplate Speed | 43 RPM |
Full Load Current | 2.7 A |
Keyway Depth | 3/16 in |
Output Shaft Diameter | 3/4 in |
Output Shaft Height | 3 in |
Overhung Load Capacity | 325 ft-lb |
Maximum Ambient Temperature | 40 Degrees C |
Input Horsepower | 1/4 hp |
Seal Type | Lip Type on Input and Output Shaft |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
DC Gearmotor, 353.0 in-lb Max. Torque, 43 RPM Nameplate RPM, 90V DC Voltage, DAYTON, Mfr# 6Z409
$896.27
Free shipping will be applied on orders over $50
DC Gearmotor, Shaft Orientation Parallel, Motor Enclosure Totally Enclosed Nonventilated, Operating Voltage 90V DC, Motor Type Permanent Magnet DC, Nameplate Speed 43 RPM, Maximum Torque 353 in-lb, Overhung Load Capacity 325 ft-lb, Rotation CW/CCW, Output Shaft Height 3 in, Mounting Orientation Any Angle, Gear Ratio 41:1, Input Horsepower 1/4 hp, Output Shaft Diameter 3/4 in, Bearing Type Ball on Motor, Heavy Duty Ball and Thrust Balls on Case
9999 in stock
Must order in multiples of 1
Subtotal:
$896.27
You must be logged in to post a review.
Reviews
There are no reviews yet.