| Item | DC Gearmotor |
| Gearmotor Voltage | 90V DC |
| Gearmotor Type | DC Gearmotor |
| Max. Torque | 152 in-lb |
| Gearmotor Shaft Type | Single |
| Gearmotor Shaft Orientation | Parallel |
| Nameplate RPM | 91 RPM |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Rotation | CW/CCW |
| Length Less Shaft | 11.75 in |
| Gearmotor Mounting Position | All Angle |
| Full Load Amps | 2.7 A |
| Standards | C-UL Recognized, UL Recognized |
| Input HP | 1/4 |
| Replacement Brushes | 6YHY9 |
| Max. Ambient Temp. | 40 Degrees C |
| Enclosure | TENV |
| Gear Case | Die Cast Aluminum |
| Thermal Protection | None |
| Gear Ratio | 19:1 |
| Tachometer Feedback | No |
| RPM Range | 76 to 100 |
| Overhung Load | 325 lb |
| Bearings | Ball on Motor, Heavy Duty Ball and Thrust Balls on Case |
| Lubrication | Permanent Heavy Fluid Gear Oil |
| Mounting | All Position |
| Gear Type | Helical (1st Stage), Spur (Subsequent Stages) |
| Brushes | Externally Replaceable |
| Shaft Orientation | Parallel |
| Shaft Length (Dimension V) | 1 1/2 in |
| Shaft Dia. (Dimension U) | 3/4 in |
| Motor Type | Permanent Magnet DC |
| Rotation | CW/CCW |
| Seals | Lip Type on Input and Output Shaft |
| Voltage | 90VDC |
| Rear Shaft Encoder/Pulse Generator Mounting | No |
| Gear Material | Hardened Steel |
| Overall Length | 13.25 in |
| Overall Height | 6.63 in |
| Overall Width | 8.13 in |
| Output Shaft Diameter | 3/4 in |
| Mounting Orientation | Any Angle |
| Bearing Type | Ball on Motor, Heavy Duty Ball and Thrust Balls on Case |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Full Load Current | 2.7 A |
| Keyway Width | 1/8 in |
| Mount Hole Center-to-Center Length | 2.5 in |
| Overhung Load Capacity | 325 ft-lb |
| Seal Type | Lip Type on Input and Output Shaft |
| Maximum Ambient Temperature | 40 Degrees C |
| Mount Hole Center-to-Center Width | 7.13 in |
| Keyway Depth | 3/16 in |
| Output Shaft Length | 1 1/2 in |
| Operating Voltage | 90V DC |
| Maximum Torque | 152 in-lb |
| Replaceable Motor Brushes | Yes |
| Nameplate Speed | 91 RPM |
| Output Shaft Height | 3 in |
| Input Horsepower | 1/4 hp |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
DC Gearmotor, 152.0 in-lb Max. Torque, 91 RPM Nameplate RPM, 90V DC Voltage, DAYTON, Mfr# 6Z411
$858.44
Free shipping will be applied on orders over $50
DC Gearmotor, Shaft Orientation Parallel, Motor Enclosure Totally Enclosed Nonventilated, Operating Voltage 90V DC, Motor Type Permanent Magnet DC, Nameplate Speed 91 RPM, Maximum Torque 152 in-lb, Overhung Load Capacity 325 ft-lb, Rotation CW/CCW, Output Shaft Height 3 in, Mounting Orientation Any Angle, Gear Ratio 19:1, Input Horsepower 1/4 hp, Output Shaft Diameter 3/4 in, Bearing Type Ball on Motor, Heavy Duty Ball and Thrust Balls on Case
9999 in stock
Must order in multiples of 1
Subtotal:
$858.44
You must be logged in to post a review.
Reviews
There are no reviews yet.