| Item | HSS Taper Shank Drill |
| Drill Bit Size | 33/64 in |
| Drill Bit Point Angle | 118 Degrees |
| Decimal Equivalent | 0.5156 in |
| Flute Type | Spiral |
| Overall Length | 8 1/2 in |
| Cutting Direction | Right Hand |
| Number of Flutes | 2 |
| Flute Length | 4 5/8 in |
| Maximum Drilling Depth | 4 5/8 in |
| Standards | ASME B94.11M |
| Measurement System | Decimal Inch |
| List Number | 1894 |
| Finish - Machining | Steam Oxide |
| Drill Bit Point Type | Radial Point |
| Coolant Fed | Non-Coolant Through |
| Drill Diameter Tolerance | +0.0000 in/-0.0012 in |
| Primary Material Application | Alloy Steel, Carbon Steel, Gray Cast Iron, Low Carbon Steel, Nodular Cast Iron |
| Shank Type - Machining | Taper |
| Primary Material Application ISO Code | K, P |
| Taper Shank Description | Morse Taper |
| Helix Angle | 21 Degrees to 34 Degrees |
| Taper Shank Size | #2 |
| Spiral Direction | Right Hand |
| Material Grade - Machining | General Purpose |
| Material - Machining | High Speed Steel |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
HSS Taper Shank Drill, Spiral Flute, RH, CLE-LINE, Mfr# C24732
$24,99
Free shipping will be applied on orders over $50
HSS Taper Shank Drill, Drill Bit Size 33/64 in, Drill Bit Point Angle 118 Degrees , Radial Point, High Speed Steel, Steam Oxide
9999 in stock
Must order in multiples of 1
Subtotal:
$24.99
You must be logged in to post a review.
Reviews
There are no reviews yet.