Item - Relay | Hazardous Location Solid State Relay |
Input or Control Voltage | 3 to 32V DC |
Output or Controlled Voltage Range | 48 to 480V AC |
Max. Output Amps w/Heat Sink | 10 A |
Case Color | Gray |
Mounting - Relay | DIN Rail |
Contact Form - Relay | SPST-NO |
Item | Hazardous Location Solid State Relay |
Max. Output Amps Without Heat Sink | 10.0 A Integral Heat Sink |
Heat Sink | Integral |
Overall Height - Relay | 2.6 in |
Body Depth - Relay | 0.7 in |
Mounting | DIN |
Turns On At | Zero Cross |
Body Width - Relay | 3.5 in |
Phase | 1 |
Finger Safe | Yes |
Input Voltage | 3 to 32V DC |
Includes | Internal Heat Sink |
Standards | CE Certified, Class I Division 2, CSA Certified, UL Listed |
Body Height - Relay | 2.6 in |
Switch Type | SCR |
Voltage Output | 48 to 480VAC |
Input Power Consumption (Burden) | 0.1W |
Relay Turns On At | Zero Crossing |
Max. Output w/Heat Sink | 10A |
Input or Control Voltage Range | 3 to 32VDC |
Depth | 3.54 in (89.93 mm) |
Mounting Style | DIN Rail & Panel |
Height | 2.56 in (65 mm) |
Electrical Connection | Screw Clamp |
Width | 0.62 in (15.75 mm) |
Body Depth | 2.6 in |
Relay Mounting Style | DIN-Rail & Surface |
Body Height | 3.5 in |
Maximum Output Current with Heat Sink | 10 A |
Dielectric Strength | 4,000V |
Response Time | 0.1 msec |
Drop Out Voltage | 1.6V DC |
Output Switching Mode | Zero Crossing |
Maximum Operating Temperature | 176 Degrees F |
Maximum Output Current without Heat Sink | 10 A |
Switch Component Type | SCR |
Minimum Operating Temperature | -22 Degrees F |
Input Current | 30 mA |
Body Width | 0.62 in |
Output Voltage Range | 48 to 480V AC |
Overall Depth | 2.6 in |
Voltage Type | AC Output |
Current Type | DC |
Status Indicator | Green LED Indicator |
Series | 861H Series |
Electrical Connection Type | Screw |
IP Rating | IP20 |
Electrical Phase | Single |
Weight | 4.48 oz |
Switch Configuration | Form A |
NEC Hazardous Location Classification | Class I, Division 2 |
Contacts Type and Composition | NO |
Maximum I?t for fusing | 850 A?.s 8.3 ms |
Product Type | Solid state relay |
Connections Terminals | Input/output screw clamp terminal 0.00 in? (2.5 mm?) AWG 14) |
maximum output current | 10 A AC |
Protection Technology | Current limiter |
Load Current | 10 A at nominal load, 8 A incandescent lamp, 4.5 A motor |
Overload Current | 24 A for 1 second |
Leakage Current | 6 mA at off-state 480 V AC |
Local Signalling | for input status 1 LED (green) |
Range | Legacy |
Surge Current | 500 A 1 cycle |
Network Number of Phases | 1 phase |
Ambient Air Temperature for Storage | -40 to 212°F (-40 to 100°C) |
Holding Current | 50 mA |
Protection Type | Reverse polarity protection |
Ambient Air Temperature for Operation | -22 to 176°F (-30 to 80°C) |
DV/dt | 350 V/µs off-state at maximum rated voltage |
Voltage Drop | <1.6 V peak AC, <1.25 V on-state AC |
Product Certifications | CE, CSA, UL |
Tightening Torque | 0.8 N.m for input/output |
Thermal Resistance | 0.66°C/W |
Input Current Limits | 30 mA at 32 V DC typical |
Control Circuit Voltage | 3...32 V DC |
Mounting Support | Panel, DIN rail |
Switch Function | SPST |
Switching Device | SCR output, Zero voltage switching |
Output Voltage | 48...480 V AC |
Must Release Voltage | 1 V |
Country of Origin (subject to change) | India |
Package Quantity | 1 |
Hazardous Location Solid State Relay, 10A, SCHNEIDER ELECTRIC, Mfr# 861HSSR410-DC-1
$75,99
Free shipping will be applied on orders over $50
Hazardous Location Solid State Relay, Electrical Connection Screw Clamp, Heat Sink Integral, Input Current 30 mA, Input Voltage 3 to 32V DC, Maximum Output Current with Heat Sink 10 A, Maximum Output Current without Heat Sink 10 A, Output Switching Mode Zero Crossing, Output Voltage Range 48 to 480V AC, Standards CE Certified, Class I Division 2, CSA Certified, UL Listed, Switch Component Type SCR, Current Type DC, Electrical Phase Single, Finger Safe Yes, Mounting Style DIN Rail & Panel
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.