| Igniter Warm-Up Time (Sec.) | 17 sec |
| Width (In.) | 5 1/4 in |
| For Use With | Residential, Commercial Heating Equipment |
| Amps AC | 0.45 A |
| Retries | 2 |
| Probe Length (In.) | 15 1/2 in |
| Lockout Time (Sec.) | 275 |
| Height (In.) | 7 in |
| Gas Type | LP/NG |
| Control Volts | 24 |
| Prepurge Time (Sec.) | 30 sec |
| Depth (In.) | 1 1/4 in |
| Includes | Ignitor |
| Electrical Ratings | 24V AC |
| Item | Integrated Furnace Control |
| Type | Universal Single Stage |
| Electrical Connections | 1/4 Spade Terminals And Molex Plugs |
| Voltage | 24V AC |
| Lead Length (In.) | 15 1/2 in |
| Standards | CSA Certified |
| Product Type | Integrated Furnace Control |
| Flame Sensor Current Output | 0.25 uA |
| Input Voltage | 120V AC, 24V AC |
| Main Valve Current Output | 1.5 A |
| Overall Height | 7 in |
| Frequency | 50/60 Hz |
| Cool Delay to Fan Off | 60 sec |
| Replacement Type | Universal |
| Lead Length | 15 1/2 in |
| Board Type | Integrated Board |
| Heat Delay to Fan Off | 180 sec |
| Ignition Cycle Time | 120 seconds (HSI), 90 seconds (Purge) |
| Electrical Connection Type | 1/4 in Spade Terminals, Molex Plug |
| Automatic Reset Time | 1 hr |
| Minimum Operating Temperature | -40 Degrees F |
| Igniter Warm Up Time | 17 sec |
| Probe Length | 15.5 in |
| Heat Delay to Fan On | 45 sec |
| Lock Out Time | 5 min |
| Thermostat Anticipator Setting | No Thermostat Anticipator |
| Compatible with Brand | Carrier |
| Overall Width | 5 1/4 in |
| Pre-Purge Time | 15 sec |
| Control Voltage | 24V AC |
| Number of Retries | 2 |
| For Fuel Type | LP, Natural Gas |
| Cool Delay to Fan On | 2 sec |
| Overall Depth | 1 1/4 in |
| OEM Replacement Part Number | HK42FZ004, HK42FZ007, HK42FZ008, HK42FZ009, HK42FZ011, HK42FZ016 |
| Maximum Operating Temperature | 175 Degrees F |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |
Control, Hot Surface Ignition, 24V, WHITE-RODGERS, Mfr# 50M56U-843
$163,99
Free shipping will be applied on orders over $50
Integrated Furnace Control, Product Type Integrated Furnace Control, Maximum Operating Temperature 175 Degrees F, Minimum Operating Temperature -40 Degrees F, Lock Out Time 5 min, Pre-Purge Time 15 sec, Number of Retries 2, Main Valve Current Output 1.5 A, Flame Sensor Current Output 0.25 uA, Ignition Cycle Time 120 seconds (HSI), 90 seconds (Purge), Automatic Reset Time 1 hr, Compatible with Brand Carrier
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.