| Item | Miniature IEC Magnetic Contactor |
| Full Load Amps-Inductive | 9 A |
| Action | Reversing |
| Full Load Amps-Resistive | 20 A |
| Number of Poles | 3 |
| Coil Volts | 24 V DC |
| Reversing | Yes |
| HP @ 1 Phase - 120V | 1/2 hp |
| HP @ 1 Phase - 230V | 1-1/2 |
| Height | 3.54 in |
| HP @ 1 Phase - 240V | 1 1/2 hp |
| HP @ 3 Phase - 208V | 2 hp |
| Width | 3.54 in |
| HP @ 3 Phase - 240V | 3 hp |
| HP @ 3 Phase - 575V | 5 hp |
| Depth | 2.24 in |
| HP @ 3 Phase - 480V | 5 hp |
| Enclosure NEMA Rating | No Enclosure |
| Aux. Contact Configuration | 1NC |
| Hz | 50/60 |
| Auxiliary Contact Form | 1NC |
| Standards | BS 5424, CSA, IEC 60947, NF C 63-110, UKCA, UL Listed, VDE 0660 |
| Series | TeSys K |
| NEMA Size | Not Applicable |
| Control Circuit Voltage Limits | Operational: 0.8 to 1.15 Uc (at 50°C), Drop-Out: 0.1 to 0.75 Uc (at 50°C) |
| Thermal Amperage | 20 A (at 50°C Power Circuit), 10 A (at 50°C Signalling Circuit) |
| Impulse Withstand Voltage | 8 kV |
| Operating Speed | 3600 cycles per hr |
| Rated Insulation Volts | 600/690V |
| Rated Short-Time Withstand Current | 90 A (at 50°C for 1 s Power Circuit), 85 A (at 50°C for 5 s Power Circuit), 80 A (at 50°C for 10 s Power Circuit), 60 A (at 50°C for 30 s Power Circuit), 45 A (at 50°C for 1 min Power Circuit), 40 A (at 50°C for 3 min Power Circuit), 80 A (For 1 s Signalling Circuit), 90 A (For 500 ms Signalling Circuit), 110 A (For 100 ms Signalling Circuit), 20 A (at 50°C for 15 min Power Circuit) |
| Features | Preassembled with Reversing Power Busbar |
| Application | Motor Control, Resistive Load |
| IP Rating | IP20 |
| Mounts On | Plate, Rail |
| Impedance | 3 mOhm |
| Switching Voltage | 17 V (Signalling Circuit) |
| Fuse Amps | 25 A (Power Circuit), 10 A (Signalling Circuit) |
| Working Height | 6561.68 ft |
| Shock Resistance | 10 G for 11 ms (on Y axis with Contactor Closed), 15 G for 11 ms (on X and Z axis with Contactor Closed), 6 G for 11 ms (on Y axis with Contactor Open), 10 G for 11 ms (on X and Z axis with Contactor Open) |
| Rated Voltage | 690V AC |
| Insulation Resistance Range | Greater Than 10 MOhms (Signalling Circuit) |
| Fire Rating | UL 94 V1, NF F 16-101, NF F 16-102 |
| Operating Time | 30 to 40 ms (Coil Energisation and NO Closing), 10 ms (Coil De-Energisation and NO Opening) |
| Overvoltage Category | CAT III |
| Switching Current | 5 mA (Signalling Circuit) |
| Tightening Torque | 0.8 to 1.3 Nm |
| Electrical Connection | Screw Clamp Terminals |
| Rated Breaking Capacity | 110 A @ 415V, 440V, 220 to 230V, 380 to 400 V, 80 A @ 500V, 70 A @ 660 to 690V |
| Environmental Attributes | Mercury Free, Toxic Heavy Metal Free |
| Rated Making Capacity | 110 A |
| Electrical Durability | 0.18 Mcycles (20 A, AC-1, Less than 440 V), 1.3 Mcycles (9 A, AC-3, Less than 440 V), 1.3 Mcycles (9 A, AC-3e, Less than 440 V) |
| Watts Loss | 3W |
| Max. Operating Watts | 2.2 kW (at 220 to 230V AC 50/60 Hz), 4 kW (at 380 to 415VAC 50/60 Hz), 4 kW (at 440V AC 50/60 Hz), 4 kW (at 480V AC 50/60 Hz), 4 kW (at 500 to 600V AC 50/60 Hz), 4 kW (at 660 to 690V AC 50/60 Hz) |
| Mechanical Durability | 5 Mcycles |
| Vibration Resistance | 4 G (Contactor Closed), 2 G (Contactor Open) |
| Net Weight | 0.48 kg |
| Frequency | 50/60 Hz |
| Overall Width | 3.54 in |
| Mounting Style | DIN Rail, Plate |
| Reversing Capability | Reversing |
| Horsepower @ Three Phase - 600V AC | 5 hp |
| Maximum Operating Temperature | 122 Degrees F |
| Terminal Connection Type | Screw Clamp Terminals |
| Horsepower @ Single Phase - 240V AC | 1 1/2 hp |
| NEMA Enclosure Rating | No Enclosure |
| Horsepower @ Three Phase - 208V AC | 2 hp |
| Maximum Voltage Rating | 690V AC |
| Mechanical Operating Durability | 5,000,000 |
| Number of Normally Open Main Contacts | 3 |
| Overall Depth | 2.24 in |
| Full Load Current - Inductive | 9 A |
| Resistance Properties | Insulation Resistant |
| Number of Auxillary Contacts | 1 |
| Horsepower @ Single Phase - 120V AC | 1/2 hp |
| Embedded Surge Suppressor | No |
| Full Load Current - Resistive | 20 A |
| Contactor Style | IEC |
| Includes Auxiliary Contacts | Yes |
| Minimum Operating Temperature | -13 Degrees F |
| Electrical Operating Durability | 1,300,000, 180,000 |
| Overall Height | 2.28 in |
| Coil Voltage | 24V DC |
| Horsepower @ Three Phase - 480V AC | 5 hp |
| NEMA Enclosure Material | Not Applicable |
| Horsepower @ Three Phase - 240V AC | 3 hp |
| Auxiliary Contact Composition | 1 NC |
| Connections - Terminals | screw clamp terminals 1 0.00 to 0.01 in? (1.5 to 4 mm?)solid, screw clamp terminals 1 0.00 to 0.01 in? (0.75 to 4 mm?)flexible without cable end, screw clamp terminals 1 0.00 to 0.00 in? (0.34 to 2.5 mm?)flexible with cable end, screw clamp terminals 2 0.00 to 0.01 in? (1.5 to 4 mm?)solid, screw clamp terminals 2 0.00 to 0.01 in? (0.75 to 4 mm?)flexible without cable end, screw clamp terminals 2 0.00 to 0.00 in? (0.34 to 1.5 mm?)flexible with cable end |
| Rated Short Time Withstand Current | 90 A 122°F (50°C) - 1 s for power circuit, 85 A 122°F (50°C) - 5 s for power circuit, 80 A 122°F (50°C) - 10 s for power circuit, 60 A 122°F (50°C) - 30 s for power circuit, 45 A 122°F (50°C) - 1 min for power circuit, 40 A 122°F (50°C) - 3 min for power circuit, 20 A 122°F (50°C) - Greater than or Equal to 15 min for power circuit, 80 A - 1 s for signalling circuit, 90 A - 500 ms for signalling circuit, 110 A - 100 ms for signalling circuit |
| Associated Fuse Rating | 25 A gG at Less than or Equal to 440 V for power circuit, 25 A aM for power circuit, 10 A gG for signalling circuit conforming to IEC 60947, 10 A gG for signalling circuit conforming to VDE 0660 |
| Operating Altitude | 6561.68 ft (2000 m) without derating |
| Flame Retardance | V1 conforming to UL 94, Requirement 2 conforming to NF F 16-101, Requirement 2 conforming to NF F 16-102 |
| Minimum Switching Voltage | 17 V for signalling circuit |
| Poles Description | 3P |
| Maximum Operating Rate | 3600 cyc/h |
| Conventional Free Air Thermal Current | 20 A (at 140°F (60°C)) for power circuit, 10 A (at 122°F (50°C)) for signalling circuit |
| Power Pole Contact Composition | 3 NO |
| Product Certifications | CB Scheme, CCC, UL, CSA, EAC, CE, UKCA |
| Control Circuit Type | DC standard |
| Hold-In Power Consumption in W | 3 W 68°F (20°C) |
| Heat Dissipation | 3 W |
| Safety Reliability Level | B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1, B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1 |
| Device Application | Control |
| Insulation Resistance | Greater than 10 MOhm for signalling circuit |
| Product Or Component Type | Reversing contactor |
| Average Impedance | 3 mOhm - Ith 20 A 50 Hz for power circuit |
| Rated Insulation Voltage | Power circuit 600 V UL 508, Power circuit 690 V IEC 60947-4-1, Signalling circuit 690 V IEC 60947-4-1, Signalling circuit 690 V IEC 60947-5-1, Signalling circuit 600 V UL 508, Power circuit 600 V CSA C22.2 No 14, Signalling circuit 600 V CSA C22.2 No 14 |
| IP Degree Of Protection | IP20 VDE 0106 |
| Ambient Air Temperature For Storage | -58 to 176°F (-50 to 80°C) |
| Non Overlap Distance | 0.02 in (0.5 mm) |
| Motor Power KW | 2.2 kW 220 to 230 V AC 50/60 Hz, 4 kW 380 to 415 V AC 50/60 Hz, 4 kW 440/690 V AC 50/60 Hz |
| Utilisation Category | AC-3, AC-3e, AC-4, AC-1 |
| Mounting Support | Plate, Rail |
| IRMS Rated Making Capacity | 110 A AC for power circuit conforming to IEC 60947, 110 A AC for signalling circuit conforming to IEC 60947 |
| Mechanical Robustness | Shocks contactor closed, on Z axis15 Gn for 11 ms IEC 60068-2-27, Shocks contactor opened, on Z axis10 Gn for 11 ms IEC 60068-2-27, Vibrations contactor closed4 Gn, 5 to 300 Hz IEC 60068-2-6, Vibrations contactor opened2 Gn, 5 to 300 Hz IEC 60068-2-6, Shocks contactor opened, on X axis10 Gn for 11 ms IEC 60068-2-27, Shocks contactor opened, on Y axis6 Gn for 11 ms IEC 60068-2-27, Shocks contactor closed, on X axis15 Gn for 11 ms IEC 60068-2-27, Shocks contactor closed, on Y axis10 Gn for 11 ms IEC 60068-2-27 |
| Minimum Switching Current | 5 mA for signalling circuit |
| Ambient Air Temperature For Operation | -13 to 122°F (-25 to 50°C) |
| Interlocking Type | Mechanical |
| Protective Treatment | TC IEC 60068, TC DIN 50016 |
| Auxiliary Contacts Type | Instantaneous 1 NC |
| Rated Operational Voltage | Power circuit 690 V AC 50/60 Hz, Signalling circuit Less than or Equal to 690 V AC 50/60 Hz |
| Rated Operational Current | 9 A (at Less than 140°F (60°C)) at Less than or Equal to 440 V AC AC-3 for power circuit, 9 A (at Less than 140°F (60°C)) at Less than or Equal to 440 V AC AC-3e for power circuit, 20 A (at Less than 140°F (60°C)) at Less than or Equal to 690 V AC AC-1 for power circuit |
| Inrush Power in W | 3 W 68°F (20°C)) |
| Contactor Application | Motor control, Resistive load |
| Country of Origin (subject to change) | France |
| Package Quantity | 1 |
IEC Mini Magnetic Contactor, 3 Poles, 24 V DC, 9 A, Reversing: Yes, SCHNEIDER, Mfr# LP2K0901BD
$212.42
Free shipping will be applied on orders over $50
Miniature IEC Magnetic Contactor, Auxiliary Contact Form 1NC, NEMA Enclosure Rating No Enclosure, NEMA Size Not Applicable, Coil Voltage 24V DC, Number of Poles 3, Full Load Current - Inductive 9 A, Full Load Current - Resistive 20 A, Reversing Capability Reversing, Overall Height 2.28 in, Overall Width 3.54 in, Terminal Connection Type Screw Clamp Terminals, Mounting Style DIN Rail, Plate, Series TeSys K, Number of Auxillary Contacts 1, Contactor Style IEC
9999 in stock
Must order in multiples of 1
Subtotal:
$212.42
You must be logged in to post a review.
Reviews
There are no reviews yet.