| Item | Indicating Pressure Transmitter |
| Power Required | 18 to 30 V DC (3-Wire), 20 to 30 V DC (2-Wire) |
| Process Connection | 1 in BSPP |
| Display | Display unit LED, green switching status LED, yellow function display alphanumeric display, 4-digit measured values alphanumeric display, 4-digit |
| IP Rating | IP67, IP68, IP69K |
| Standards | 3A, ACS, CE, EC 1935/2004, EHEDG Certified, FCM, FDA, IO-Link, Reg31, UKCA, UL Listed |
| Wetted Materials | 316L Stainless Steel, Ceramic, PTFE |
| Overall Length | 59 mm |
| Maximum Pressure | 400 mbar |
| Process Connection Type | BSPP |
| Minimum Pressure | -50 mbar |
| Process Connection Size | 1 in |
| Display Screen Type | LED |
| Accuracy | +/-.2 |
| Number of Wires | 2, 3 |
| Housing Height | 90 mm |
| Response Time | 3 msec, 7 msec, 30 msec |
| Display Units | inH2O, kPa, mbar |
| Output | 100 mA DC, 2 VDC |
| Pressure Units | inH2O, kPa, mbar |
| Manufacturer Warranty Length | 5 yr |
| Process Connection Gender | Male |
| Overall Width | 64 mm |
| Maximum Operating Temperature | 80 Degrees C |
| Pressure Range | -50 mbar to 400 mbar |
| Display Type | Digital |
| Storage Temperature Range | -40 Degrees to 100 Degrees C |
| Features | High Temperature Resistance and High Protection Rating, Hygienic, Flush Design, Programmable Analog and Switching Output, Resistant to High-Pressure Cleaning with Aggressive Cleaning Agents, Robust Stainless Steel Design for the Requirements of the Food and Beverage Industry |
| Weight | 356.4 g |
| (hidden) product type builder | PI1718 IFM |
| Fitting Material | 316L Stainless Steel |
| (hidden) Pressure Range | -50 mbar to 400 mbar |
| For Use With Media Type | Gases, Liquids, Suspended Particles |
| Minimum Operating Temperature | -25 Degrees C |
| Overall Height | 107 mm |
| Enclosure Rating | IP67, IP68, IP69K |
| Electrical Connections | 4-Pin M12 Connector |
| Number of inputs and outputs | Number of digital outputs: 2, Number of analogue outputs: 1 |
| Shock resistance | DIN EN 60068-2-27 50 g (11 ms) |
| Permanent current rating of switching output DC [mA] | 100 |
| Pressure rating | 8000 mbar 3200 inH2O 800 kPa |
| Profiles | Identification and Diagnosis (0x4000), Measurement Data Channel (0x800A) |
| Damping for the analogue output dAA [s] | 0...99.99 |
| UL approval | UL Approval no. J048 File number UL E174189 |
| Connection | Connector: 1 x M12, coding: A, Contacts: gold-plated |
| Power-on delay time [s] | < 1, < 0.5 |
| Damping process value dAP [s] | 0...99.99 |
| Reset point rP | -50...399.4 mbar -20.1...160.3 inH2O -5...39.94 kPa |
| Hysteresis deviation [% of the span] | <± 0,15, (Turn down 1:1) |
| Special feature | Gold-plated contacts |
| Protection class | III |
| Reverse polarity protection | yes |
| Long-term stability [% of the span] | <± 0,1, (Turn down 1:1, per year) |
| Number of digital outputs | 2 |
| Type of short-circuit protection | pulsed |
| IO-Link functions (acyclical) | application specific tag, internal temperature, operating hours counter, switching cycles counter, Pressure peak counter |
| Protection | IP 67, IP 68, IP 69K |
| Resolution [K] | 0.2 |
| SDCI standard | IEC 61131-9 |
| Analogue end point | 30...400 mbar 12...160.6 inH2O 3...40 kPa |
| Analogue current output [mA] | 4...20, invertible, (scalable) |
| Min. difference between SP and rP | 0.6 mbar 0.3 inH2O 0.06 kPa |
| Accuracy [K] | ± 2,5+ (0,08 x ( Umgebungstemperatur - Mediumtemperatur )) |
| In steps of | 0.1 mbar 0.1 inH2O 0.01 kPa |
| Measuring range | -50...400 mbar -20...160.6 inH2O -5...40 kPa, -25...150°C -13...302°F |
| Storage temperature [°C] | -40...100 |
| Number of analogue outputs | 1 |
| IO-Link resolution temperature [K] | 0.2 |
| Tightening torque [Nm] | 35 |
| Type of pressure | relative pressure, vacuum |
| Dynamic response T05 / T09 [s] | < 35 / < 135, (DIN EN 60751 water , > 0,9 m/s) |
| IO-Link resolution pressure [mbar] | 0.02 |
| Transmission type | COM2 (38,4 kBaud) |
| Required master port type | A |
| Integrated watchdog | yes |
| IO-Link revision | 1.1 |
| Output signal | switching signal, analogue signal, IO-Link |
| Max. load [?] | (Ub - 10 V) / 21,5 mA, 650 ? (Ub = 24 V), 300 |
| Characteristics deviation [% of the span] | <± 0,2, (DIN IEC EN 62828-1 incl. zero point and span error, non-linearity, hysteresis, Turn down 1:1) |
| MTTF [years] | 214 |
| Linearity deviation [% of the span] | <± 0,15, (Turn down 1:1) |
| Electrical design | PNP/NPN |
| Min. pressure cycles | 100 million |
| Total deviation over temperature range | Temperature range total deviation -25...15°C Characteristics deviation± 0,1 % der Spanne / 10 K 15...80°C Characteristics deviation 80...150°C Characteristics deviation± 0,15 % der Spanne / 10 K |
| Current consumption [mA] | 3.5...21.5, 5...45, (430 bei max. Laststrom) |
| Switch point accuracy [% of the span] | <± 0,2, (DIN EN IEC 62828-1, Turn down 1:1) |
| Short-circuit protection | yes |
| Set point SP | -49.4...400 mbar -19.8...160.6 inH2O -4.94...40 kPa |
| Operating voltage [V] | 20...30 DC, 18...30 DC |
| IO-Link process data (cyclical) | function bit length pressure 32 temperature 32 device status 4 binary switching information 2 |
| Repeatability [K] | ± 0,2 |
| Repeatability [% of the span] | <± 0,1, (with temperature fluctuations < 10 K, Turn down 1:1) |
| Switching frequency DC [Hz] | 125 |
| Media | viscous media and liquids with suspended particles, liquids and gases |
| EMC | DIN EN 61326-1 |
| Overload protection | yes |
| Display unit | mbar, kPa, inH2O |
| Communication interface | IO-Link |
| Factory setting | SP1 =100 mbar rP1 = 92 mbar SP2 = 300 mbar rP2 = 292 mbar ASP = 0.00 mbar AEP = 400 mbar dAP = 2.00 s dAA =2.00 s |
| Materials (wetted parts) | ceramics (99.9 % Al2O3), stainless steel (1.4435 / 316L), surface characteristics: Ra < 0,4 / Rz 4, PTFE |
| SIO mode | yes |
| Step response time analogue output [ms] | 7, 30 |
| Min. process cycle time [ms] | 5.6 |
| Vacuum resistance [mbar] | -1000 |
| Ambient temperature [°C] | -25...80 |
| Output function | normally open / normally closed, (parameterisable) |
| Min. bursting pressure | 30000 mbar 12044 inH2O 3000 kPa |
| Application | flush mountable for the food and beverage industry |
| Total number of outputs | 2 |
| Materials | stainless steel (1.4404 / 316L), FKM, PTFE, PBT, PEI, PFA |
| Min. response time of switching output (dAP) [ms] | 3 |
| Min. insulation resistance [M?] | 100, (500 V DC) |
| Vibration resistance | DIN EN 60068-2-6 20 g (10...2000 Hz) |
| Analogue start point | -50...320 mbar -20.1...128.5 inH2O -5...32 kPa |
| Max. voltage drop switching output DC [V] | 2 |
| Medium temperature [°C] | -25...150 |
| Country of Origin (subject to change) | Germany |
| Package Quantity | 1 |
Indicating Pressure Transmitter, 356.4 g, IFM, Mfr# PI1718
$876,99
Free shipping will be applied on orders over $50
Indicating Pressure Transmitter, Output 100 mA DC; 2 VDC, Process Connection Gender Male, Process Connection Size 1 in, Maximum Pressure 400 mbar, Minimum Pressure -50 mbar, Accuracy +/-.2, IP Rating IP67; IP68; IP69K, Number of Wires 2, 3, Display Units inH2O, kPa, mbar, Fitting Material 316L Stainless Steel, Display Screen Type LED, Display Type Digital, Electrical Connections 4-Pin M12 Connector
9999 in stock
Must order in multiples of 1
Subtotal:
$876.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.