Item | Insert Bearing |
Bore Dia. | 7/8 in |
Outside Dia. | 52 mm |
Series | UCS |
Width | 34 mm |
Dynamic Load Capacity (Lb.) | 3,150 lb |
Locking Type | Setscrew |
Inside Dia. | 7/8 in |
Bearing Material | Steel |
Includes | Retaining Ring, Set Screws |
Bearing Industry Number | UCS205-014LD1NR |
Rolling Element Rows | 1 |
Static Radial Load Capacity | 1,765 lbf |
Ring Material | Alloy Steel |
Maximum Temperature | 250 Degrees F |
Bearing Insert Type | Radial/Deep Groove Ball |
Ball Material Grade | 52100 |
Inner Ring Width | 34 mm |
Shaft Locking Type | Set Screws |
Dynamic Radial Load Capacity | 3,150 lbf |
Seal Type | Contact |
Load Direction | Radial |
Bore Diameter | 7/8 in |
Bearing Insert Shape | Cylindrical |
System of Measurement | Inch |
Lubrication Openings | None |
Seal Material | Nitrile Rubber |
Minimum Temperature | -4 Degrees F |
Rolling Element Material Grade | 52100 |
Closure | Double Sealed |
Ring End to Center Width | 0.78 in |
Ball Material | Alloy Steel |
Rolling Element Material | Alloy Steel |
Plain Bearing Material | Steel |
Ring Material Grade | 52100 |
Outside Diameter | 2 3/64 in |
Outer Ring Width | 0.669 in |
Country of Origin (subject to change) | Japan |
Package Quantity | 1 |
Insert Ball Bearing, Bore 7/8 In, NTN, Mfr# UCS205-014LD1NR
$38.07
Free shipping will be applied on orders over $50
Insert Bearing, Ball Material Alloy Steel, Bearing Industry Number UCS205-014LD1NR, Bearing Insert Type Radial/Deep Groove Ball, Bearing Insert Shape Cylindrical, Bore Diameter 7/8 in, Closure Double Sealed, Maximum Temperature 250 Degrees F, Minimum Temperature -4 Degrees F, Outer Ring Width 0.669 in, Outside Diameter 2 3/64 in, Plain Bearing Material Steel, Ring Material Alloy Steel, Rolling Element Material Alloy Steel, Rolling Element Rows 1, Seal Type Contact, Shaft Locking Type Set Screws
9999 in stock
Must order in multiples of 1
Subtotal:
$38.07
You must be logged in to post a review.
Reviews
There are no reviews yet.