| Item | Jobber Length Drill Bit |
| Drill Bit Dimension Type | Metric |
| Drill Bit Size | 5.50 mm |
| Shank Type | Straight |
| Drill Bit Point Angle | 130 Degrees |
| Drill Bit Material | Cobalt |
| Drill Bit Finish | Uncoated |
| Decimal Equivalent | 0.2165 |
| Material | High Speed Steel |
| Flute Type | Spiral |
| Coolant Fed | Non-Coolant Through |
| Shank Dia. | 5.5 mm |
| Overall Length | 93.00 mm |
| Cutting Direction | Right Hand |
| Number of Flutes | 2 |
| Flute Length | 57.00 mm |
| Maximum Drilling Depth | 57 mm |
| Number of Pieces | 1 |
| Grade | General Purpose |
| Coolant Through | No |
| Depth x Dia. Ratio | 8xD |
| Standards | DIN 338 |
| Application | Stainless Steel, Super Alloy |
| List Number | A1244 |
| Depth:Dia. Ratio | 8xD |
| Point type | Conical |
| Shank Length | 36.00 mm |
| Drilling Depth | 48.00mm |
| Secondary Material Application ISO Code | N, P |
| Drill Length Class | Jobber Length |
| Primary Material Application ISO Code | M, S |
| Series | VA |
| Primary Material Application | Nickel, Stainless Steel, Titanium |
| Measurement System | Metric |
| Finish - Machining | Bright (Uncoated) |
| Shank Type - Machining | Straight |
| Drill Bit Point Type | Conical Point |
| Sheeter Drill | No |
| Material - Machining | High Speed Steel |
| Drill Diameter Tolerance | H8 |
| Drill Point Length | 1.28mm |
| Secondary Material Application | Aluminum, Brass, Bronze, Copper, Steel |
| Material Grade - Machining | General Purpose |
| Country of Origin (subject to change) | France |
| Package Quantity | 1 |
Walter Titex - Twist drill, WALTER TITEX, Mfr# A1244-5.5
$14,29
Free shipping will be applied on orders over $50
Jobber Length Drill Bit, Drill Bit Size 5.50 mm, Drill Bit Point Angle 130 Degrees , High Speed Steel, Bright (Uncoated), Decimal Equivalent 0.2165, Metric, Drill Bit Point Type Conical Point, Non-Coolant Through
9999 in stock
Must order in multiples of 5
Subtotal:
$71.45
You must be logged in to post a review.
Reviews
There are no reviews yet.