Item | Motion Control Coupling |
Shaft Locking Type - Couplings | 1 Piece Clamp |
System of Measurement | Metric |
Bore Dia. | 11mm x 7mm |
Material - Couplings | Stainless Steel |
Outside Dia. | 25.4 mm |
Overall Length | 38.1 mm |
Finish | Bright |
Length through Bore (In.) | 0.704 |
Length through Bore | 17.87 mm |
Max. Bore (mm) | 11 mm |
Item - Motion Control Couplings | Motion Control Coupling |
Max. Temp. Range (F) | 350 Degrees |
Screw Type | Cap Screw |
Size | FCMR25 |
Torsional Stiffness (Deg./In.-Lbs.) | 0.084 |
Outside Dia. (mm) | 25.4 |
Torque (In.-Lbs.) | 39 |
Clearance Dia. (In.) | 1.117 in |
Screw Size | M4 |
Clearance Dia. (mm) | 28.37 |
Max. Angular Misalignment | 3 Degrees |
Outside Dia. (In.) | 1 |
Rated Torque | 39 in-lb |
Min. Bore (mm) | 7 |
Length through Bore (mm) | 17.87 |
Style | 6-Beam Clamp |
Max. RPM | 6,000 RPM |
Material | Stainless Steel |
Max. Axial Misalignment (In.) | +/-0.01 |
Overall Length (In.) | 1.5 |
Screw Size (mm) | M4 |
Overall Length (mm) | 38.1 |
Max. Parallel Misalignment (In.) | 0.015 in |
Max. Temp. | 350 Degrees F |
Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant |
Application | Servo Motors to Lead Screws |
Screw Material | Alloy Steel with Nypatch |
Bore Tolerance | +0.025/-0.000 mm |
Zero Backlash | Yes |
Coupling Material Finish | Bright |
Maximum Operating Temperature | 176 Degrees C |
Fastener Tightening Torque | 4.6 N-m |
Shaft Tolerance | +0.000/-0.013 mm |
Angular Misalignment | 3 Degrees |
Maximum Torque | 4.4 N-m |
Coupling Material Grade | 303 |
Dynamic Torque Reversing | 1.1 N-m |
Series | FCMR |
Torsional Stiffness | 1.35 N-m/Deg |
Coupling Outside Diameter | 25.4 mm |
Length Through Bore 2 | 18.3 mm |
Length Through Bore 1 | 18.3 mm |
Dynamic Torque Non-Reversing | 2.2 N-m |
Features | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single or Four Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Spiral Coupling With Nypatch Anti-Vibration Hardware, Two Sets of Three Spiral Cuts, Zero-Backlash |
Shaft Locking Type | Clamp On |
Full Bearing Support Required | Yes |
Bore Diameter 2 | 7 mm |
For Misalignment Type | Angular, Axial, Parallel |
Different Bore Sizes | Yes |
For Environment | Angular Misalignment, Axial Motion, Parallel Misalignment |
Parallel Misalignment | 0.38 mm |
Bore Diameter 1 | 11 mm |
Number of Beams | 6 |
Number of Locking Screws | 2 |
Minimum Operating Temperature | -40 Degrees C |
Axial Motion | 0.25 mm |
Included Screws | (2) Hex Socket Cap Screw |
Bore Type | Round |
Maximum Speed | 6,000 RPM |
Coupling Material | Stainless Steel |
Moment of Inertia | 0.000011293 kgf/m sq |
Screw Thread Size | M4 |
Screw Material Finish | Black Oxide |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Coupling, 6 Beam Clamp, 11mmx7mm, RULAND, Mfr# FCMR25-11-7-SS
$126,99
Free shipping will be applied on orders over $50
Motion Control Coupling, Angular Misalignment 3 Degrees , Bore Diameter 1 11 mm, Bore Diameter 2 7 mm, Coupling Material Stainless Steel, Coupling Outside Diameter 25.4 mm, Maximum Speed 6,000 RPM, Maximum Torque 4.4 N-m, Axial Motion 0.25 mm, Overall Length 38.1 mm, Parallel Misalignment 0.38 mm, System of Measurement Metric, Different Bore Sizes Yes, Torsional Stiffness 1.35 N-m/Deg, Bore Type Round, Shaft Locking Type Clamp On, Number of Beams 6, Length Through Bore 2 18.3 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$126.99
You must be logged in to post a review.
Reviews
There are no reviews yet.