Shaft Locking Type - Couplings | 1 Piece Clamp |
Item | Motion Control Coupling |
System of Measurement | Metric |
Bore Dia. | 14mm x 11mm |
Material - Couplings | Aluminum |
Outside Dia. | 38.1 mm |
Overall Length | 57.2 mm |
Finish | Bright |
Max. Angular Misalignment | 3 Degrees |
Max. Axial Misalignment (In.) | +/-0.03 |
Item - Motion Control Couplings | Motion Control Coupling |
Min. Bore (mm) | 11 |
Torsional Stiffness (Deg./In.-Lbs.) | 0.027 |
Outside Dia. (mm) | 38.1 |
Length through Bore (mm) | 26.47 |
Screw Size (mm) | M5 |
Style | 6-Beam Clamp |
Max. Bore (mm) | 14 mm |
Length through Bore | 26.47 mm |
Torque (In.-Lbs.) | 110 |
Length through Bore (In.) | 1.042 |
Max. Parallel Misalignment (In.) | 0.015 in |
Rated Torque | 110 in-lb |
Max. RPM | 6,000 RPM |
Clearance Dia. (In.) | 1.642 in |
Max. Temp. | 225 Degrees F |
Overall Length (mm) | 57.2 |
Clearance Dia. (mm) | 41.71 |
Size | FCMR38 |
Overall Length (In.) | 2.25 |
Screw Type | Cap Screw |
Outside Dia. (In.) | 1.5 |
Screw Size | M5 |
Material | Aluminum |
Max. Temp. Range (F) | 225 Degrees |
Application | Light-Duty Power Transmission, Servo Motors to Lead Screws |
Standards | Conflict Minerals Compliant, DIN 912 12.9, REACH Compliant, RoHS3 Compliant |
Screw Material | Alloy Steel with Nypatch |
Bore Tolerance | +0.025/-0.000 mm |
Coupling Material Finish | Bright |
Shaft Locking Type | Clamp On |
Full Bearing Support Required | Yes |
Length Through Bore 1 | 27.3 mm |
Coupling Material | Aluminum |
For Environment | Angular Misalignment, Axial Motion, Parallel Misalignment |
Angular Misalignment | 3 Degrees |
Screw Thread Size | M5 |
Zero Backlash | Yes |
Shaft Tolerance | +0.000/-0.013 mm |
Maximum Operating Temperature | 107 Degrees C |
Dynamic Torque Reversing | 3.11 N-m |
Number of Beams | 6 |
Series | FCMR |
Minimum Operating Temperature | -40 Degrees C |
Bore Diameter 1 | 14 mm |
Maximum Torque | 12.43 N-m |
Bore Diameter 2 | 11 mm |
For Misalignment Type | Angular, Axial, Parallel |
Torsional Stiffness | 4.17 N-m/Deg |
Number of Locking Screws | 2 |
Features | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single or Four Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Spiral Coupling With Nypatch Anti-Vibration Hardware, Two Sets of Three Spiral Cuts, Zero-Backlash |
Fastener Tightening Torque | 9.5 N-m |
Minimum Bore Diameter | 11 mm |
Different Bore Sizes | Yes |
Coupling Outside Diameter | 38.1 mm |
Maximum Speed | 6,000 RPM |
Parallel Misalignment | 0.76 mm |
Moment of Inertia | 0.000030032 kgf/m sq |
Length Through Bore 2 | 27.3 mm |
Screw Material Finish | Black Oxide |
Dynamic Torque Non-Reversing | 6.22 N-m |
Axial Motion | 0.38 mm |
Bore Type | Round |
Included Screws | (2) Hex Socket Cap Screw |
Coupling Material Grade | 7075 |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Coupling, 6 Beam Clamp, 14mmx11mm, RULAND, Mfr# FCMR38-14-11-A
$109,99
Free shipping will be applied on orders over $50
Motion Control Coupling, Angular Misalignment 3 Degrees , Bore Diameter 1 14 mm, Bore Diameter 2 11 mm, Coupling Material Aluminum, Coupling Outside Diameter 38.1 mm, Maximum Speed 6,000 RPM, Maximum Torque 12.43 N-m, Axial Motion 0.38 mm, Overall Length 57.2 mm, Parallel Misalignment 0.76 mm, System of Measurement Metric, Different Bore Sizes Yes, Torsional Stiffness 4.17 N-m/Deg, Bore Type Round, Shaft Locking Type Clamp On, Number of Beams 6, Length Through Bore 2 27.3 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$109.99
You must be logged in to post a review.
Reviews
There are no reviews yet.