Shaft Locking Type - Couplings
1 Piece Clamp
Item
Motion Control Coupling
System of Measurement
Metric
Material - Couplings
Stainless Steel
Length through Bore (mm)
26.47
Max. Parallel Misalignment (In.)
0.03 in
Max. Temp. Range (F)
350 Degrees
Max. Axial Misalignment (In.)
+/-0.015
Item - Motion Control Couplings
Motion Control Coupling
Length through Bore
26.47 mm
Length through Bore (In.)
1.042
Clearance Dia. (In.)
1.642 in
Max. Angular Misalignment
3 Degrees
Torsional Stiffness (Deg./In.-Lbs.)
0.045
Standards
Conflict Minerals Compliant, DIN 912 12.9, REACH Compliant, RoHS3 Compliant
Application
Light-Duty Power Transmission, Servo Motors to Lead Screws
Bore Tolerance
+0.025/-0.000 mm
Screw Material
Alloy Steel with Nypatch
Angular Misalignment
3 Degrees
Screw Material Finish
Black Oxide
Dynamic Torque Non-Reversing
8.21 N-m
Coupling Material Finish
Bright
Shaft Tolerance
+0.000/-0.013 mm
Minimum Bore Diameter
11 mm
Coupling Material Grade
303
Number of Locking Screws
2
Coupling Material
Stainless Steel
Fastener Tightening Torque
16 N-m
Minimum Operating Temperature
-40 Degrees C
Coupling Outside Diameter
38.1 mm
Torsional Stiffness
2.5 N-m/Deg
Moment of Inertia
0.000083407 kgf/m sq
Shaft Locking Type
Clamp On
Full Bearing Support Required
Yes
Features
Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single or Four Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Spiral Coupling With Nypatch Anti-Vibration Hardware, Two Sets of Three Spiral Cuts, Zero-Backlash
For Misalignment Type
Angular, Axial, Parallel
For Environment
Angular Misalignment, Axial Motion, Parallel Misalignment
Length Through Bore 1
27.3 mm
Included Screws
(2) Hex Socket Cap Screw
Maximum Operating Temperature
176 Degrees C
Dynamic Torque Reversing
4.11 N-m
Parallel Misalignment
0.76 mm
Length Through Bore 2
27.3 mm
Country of Origin (subject to change)
United States
