Shaft Locking Type - Couplings
1 Piece Clamp
Material - Couplings
Stainless Steel
Length through Bore (In.)
0.750
Item - Motion Control Couplings
Motion Control Coupling
Item
Motion Control Coupling
Torsional Stiffness (Deg./In.-Lbs.)
0.046
Clearance Dia. (In.)
1.117 in
Max. Angular Misalignment
3 Degrees
Max. Parallel Misalignment (In.)
0.015 in
Max. Axial Misalignment (In.)
+/-0.010
Length through Bore
0.75 in
Screw Material
Alloy Steel with Nypatch
Dynamic Torque Reversing
12.5 lb-in
Bore Tolerance
+0.001/-0.000 in
Dynamic Torque Non-Reversing
25 lb-in
Moment of Inertia
0.0381 lb-in sq
Torsional Stiffness
21.74 in-lb/Deg
Minimum Operating Temperature
-40 Degrees F
Coupling Outside Diameter
1 in
Shaft Tolerance
+0.0000/-0.0005 in
Length Through Bore 1
0.7 in
Features
Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single or Four Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Spiral Coupling With Nypatch Anti-Vibration Hardware, Two Sets of Three Spiral Cuts, Zero-Backlash
Maximum Operating Temperature
350 Degrees F
For Misalignment Type
Angular, Axial, Parallel
System of Measurement
Inch
Coupling Material
Stainless Steel
Coupling Material Grade
303
Standards
Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant
Application
Light-Duty Power Transmission, Servo Motors to Lead Screws
Shaft Locking Type
Clamp On
Coupling Material Finish
Bright
Included Screws
(2) Hex Socket Cap Screw
Full Bearing Support Required
Yes
Screw Material Finish
Black Oxide
Number of Locking Screws
2
Fastener Tightening Torque
4.6 N-m
Length Through Bore 2
0.7 in
Angular Misalignment
3 Degrees
For Environment
Angular Misalignment, Axial Motion, Parallel Misalignment
Parallel Misalignment
0.015 in
Country of Origin (subject to change)
United States
