| Shaft Locking Type - Couplings | 1 Piece Clamp |
| Item | Motion Control Coupling |
| System of Measurement | Inch to Metric |
| Bore Dia. | 5/8 in x 8mm |
| Material - Couplings | Aluminum |
| Outside Dia. | 1.181 in |
| Overall Length | 38 mm |
| Finish | Bright |
| Torsional Stiffness (Deg./In.-Lbs.) | 0.08 |
| Length through Bore (In.) | 0.695 |
| Length through Bore (mm) | 17.65 |
| Size | MWC30 |
| Outside Dia. (In.) | 1.181 |
| Clearance Dia. (In.) | 0.591 in |
| Torque (In.-Lbs.) | 61 |
| Material | Aluminum |
| Max. Axial Misalignment (In.) | +/-0.015 |
| Screw Type | Cap Screw |
| Item - Motion Control Couplings | Motion Control Coupling |
| Min. Bore (mm) | 8 |
| Max. Bore (In.) | 0.625 in |
| Style | 4-Beam Clamp |
| Rated Torque | 61 in-lb |
| Screw Size | M4 |
| Max. Temp. Range (F) | 225 Degrees |
| Max. RPM | 6,000 RPM |
| Max. Parallel Misalignment (In.) | 0.01 in |
| Max. Temp. | 225 Degrees F |
| Max. Bore (mm) | 4 mm |
| Length through Bore | 17.65 mm |
| Overall Length (mm) | 38 |
| Overall Length (In.) | 1.496 |
| Max. Angular Misalignment | 3 Degrees |
| Clearance Dia. (mm) | 15 |
| Outside Dia. (mm) | 30 |
| Screw Size (mm) | M4 |
| Application | Light-Duty Power Transmission, Servo Motors to Lead Screws |
| Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant |
| Screw Material | Alloy Steel |
| Bore Tolerance | +0.025/-0.000 mm |
| Shaft Tolerance | +0.000/-0.013 mm |
| Axial Motion | 0.25 mm |
| Moment of Inertia | 0.000007958 kgf/m sq |
| Coupling Outside Diameter | 30 mm |
| Maximum Torque | 61 in-lb |
| Minimum Bore Diameter | 8 mm |
| Number of Beams | 4 |
| Bore Diameter 2 | 8 mm |
| Screw Material Finish | Black Oxide |
| Series | MWC |
| Full Bearing Support Required | Yes |
| Coupling Material Grade | 7075 |
| Length Through Bore 1 | 17.7 mm |
| Features | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash |
| Parallel Misalignment | 0.01 in |
| For Environment | Angular Misalignment, Axial Motion, Parallel Misalignment |
| Torsional Stiffness | 1.08 N-m/Deg |
| Coupling Material | Aluminum |
| Angular Misalignment | 3 Degrees |
| Coupling Material Finish | Bright |
| Zero Backlash | Yes |
| Shaft Locking Type | Clamp On |
| Maximum Operating Temperature | 107 Degrees C |
| Bore Type | Round |
| Maximum Speed | 6,000 RPM |
| Different Bore Sizes | Yes |
| For Misalignment Type | Angular, Axial, Parallel |
| Dynamic Torque Non-Reversing | 3.45 N-m |
| Fastener Tightening Torque | 4.6 N-m |
| Included Screws | (2) Hex Socket Cap Screw |
| Length Through Bore 2 | 18.2 mm |
| Dynamic Torque Reversing | 1.73 N-m |
| Screw Thread Size | M4 |
| Bore Diameter 1 | 5/8 in |
| Number of Locking Screws | 2 |
| Minimum Operating Temperature | -40 Degrees C |
| Maximum Bore Diameter | 5/8 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Coupling, 4 Beam Clamp, 5/8in.x 8mm, RULAND, Mfr# MWC30-5/8""-8MM-A
$65,55
Free shipping will be applied on orders over $50
Motion Control Coupling, Angular Misalignment 3 Degrees , Bore Diameter 1 5/8 in, Bore Diameter 2 8 mm, Coupling Material Aluminum, Coupling Outside Diameter 30 mm, Maximum Speed 6,000 RPM, Maximum Torque 61 in-lb, Axial Motion 0.25 mm, Overall Length 38 mm, Parallel Misalignment 0.01 in, System of Measurement Inch to Metric, Different Bore Sizes Yes, Torsional Stiffness 1.08 N-m/Deg, Bore Type Round, Shaft Locking Type Clamp On, Number of Beams 4, Length Through Bore 2 18.2 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$65.55
You must be logged in to post a review.
Reviews
There are no reviews yet.