Shaft Locking Type - Couplings | 1 Piece Clamp |
Item | Motion Control Coupling |
System of Measurement | Metric |
Bore Dia. | 8mm x 5mm |
Material - Couplings | Stainless Steel |
Outside Dia. | 19.1 mm |
Overall Length | 31.8 mm |
Finish | Bright |
Max. Axial Misalignment (In.) | +/-0.008 |
Max. Temp. Range (F) | 350 Degrees |
Min. Bore (mm) | 5 |
Outside Dia. (mm) | 19.1 |
Material | Stainless Steel |
Overall Length (mm) | 31.8 |
Outside Dia. (In.) | 0.75 |
Size | FCMR19 |
Screw Size (mm) | M3 |
Screw Type | Cap Screw |
Rated Torque | 31 in-lb |
Overall Length (In.) | 1.25 |
Screw Size | M3 |
Style | 6-Beam Clamp |
Clearance Dia. (mm) | 22.33 |
Max. RPM | 6,000 RPM |
Torsional Stiffness (Deg./In.-Lbs.) | 0.096 |
Length through Bore (mm) | 15.06 |
Item - Motion Control Couplings | Motion Control Coupling |
Clearance Dia. (In.) | 0.879 in |
Max. Bore (mm) | 8 mm |
Length through Bore (In.) | 0.593 |
Max. Parallel Misalignment (In.) | 0.005 in |
Max. Temp. | 350 Degrees F |
Torque (In.-Lbs.) | 31 |
Length through Bore | 15.06 mm |
Max. Angular Misalignment | 3 Degrees |
Application | Servo Motors to Lead Screws |
Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant |
Bore Tolerance | +0.025/-0.000 mm |
Screw Material | Alloy Steel with Nypatch |
Shaft Tolerance | +0.000/-0.013 mm |
Shaft Locking Type | Clamp On |
Parallel Misalignment | 0.2 mm |
Zero Backlash | Yes |
Coupling Material | Stainless Steel |
Axial Motion | 0.13 mm |
Length Through Bore 1 | 15.4 mm |
Coupling Material Finish | Bright |
Screw Thread Size | M3 |
Series | FCMR |
Length Through Bore 2 | 15.4 mm |
Different Bore Sizes | Yes |
Torsional Stiffness | 1.18 N-m/Deg |
Maximum Speed | 6,000 RPM |
Coupling Material Grade | 303 |
Screw Material Finish | Black Oxide |
Number of Locking Screws | 2 |
Maximum Torque | 3.51 N-m |
Bore Type | Round |
Bore Diameter 2 | 5 mm |
Fastener Tightening Torque | 2.1 N-m |
Bore Diameter 1 | 8 mm |
Full Bearing Support Required | Yes |
For Environment | Angular Misalignment, Axial Motion, Parallel Misalignment |
Features | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single or Four Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Spiral Coupling With Nypatch Anti-Vibration Hardware, Two Sets of Three Spiral Cuts, Zero-Backlash |
Moment of Inertia | 0.000002964 kgf/m sq |
Dynamic Torque Non-Reversing | 1.76 N-m |
Maximum Operating Temperature | 176 Degrees C |
Number of Beams | 6 |
Minimum Operating Temperature | -40 Degrees C |
Angular Misalignment | 3 Degrees |
Included Screws | (2) Hex Socket Cap Screw |
For Misalignment Type | Angular, Axial, Parallel |
Dynamic Torque Reversing | 0.88 N-m |
Coupling Outside Diameter | 19.1 mm |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Coupling, 6 Beam Clamp, 8mmx5mm, RULAND, Mfr# FCMR19-8-5-SS
$116.39
Free shipping will be applied on orders over $50
Motion Control Coupling, Angular Misalignment 3 Degrees , Bore Diameter 1 8 mm, Bore Diameter 2 5 mm, Coupling Material Stainless Steel, Coupling Outside Diameter 19.1 mm, Maximum Speed 6,000 RPM, Maximum Torque 3.51 N-m, Axial Motion 0.13 mm, Overall Length 31.8 mm, Parallel Misalignment 0.2 mm, System of Measurement Metric, Different Bore Sizes Yes, Torsional Stiffness 1.18 N-m/Deg, Bore Type Round, Shaft Locking Type Clamp On, Number of Beams 6, Length Through Bore 2 15.4 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$116.39
You must be logged in to post a review.
Reviews
There are no reviews yet.