Item
Motion Control Coupling
Shaft Locking Type - Couplings
1 Piece Clamp
System of Measurement
Metric
Material - Couplings
Stainless Steel
Length through Bore (mm)
17.02
Clearance Dia. (In.)
1.0 in
Max. Parallel Misalignment (In.)
0.015 in
Max. Axial Misalignment (In.)
+/-0.01
Torsional Stiffness (Deg./In.-Lbs.)
0.056
Length through Bore (In.)
0.67
Max. Angular Misalignment
3 Degrees
Max. Temp. Range (F)
350 Degrees
Length through Bore
17.02 mm
Item - Motion Control Couplings
Motion Control Coupling
Standards
Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant
Application
Light-Duty Power Transmission, Servo Motors to Lead Screws
Bore Tolerance
+0.025/-0.000 mm
Screw Material
Alloy Steel
Angular Misalignment
3 Degrees
For Misalignment Type
Angular, Axial, Parallel
Features
Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash
Coupling Material Finish
Bright
Shaft Tolerance
+0.000/-0.013 mm
Coupling Material Grade
303
Included Screws
(2) Hex Socket Cap Screw
Dynamic Torque Reversing
1.7 N-m
Parallel Misalignment
0.38 mm
For Environment
Angular Misalignment, Axial Motion, Parallel Misalignment
Coupling Material
Stainless Steel
Length Through Bore 1
17.6 mm
Full Bearing Support Required
Yes
Maximum Operating Temperature
176 Degrees C
Minimum Operating Temperature
-40 Degrees C
Screw Material Finish
Black Oxide
Torsional Stiffness
2 N-m/Deg
Dynamic Torque Non-Reversing
3.39 N-m
Moment of Inertia
0.000017643 kgf/m sq
Fastener Tightening Torque
4.6 N-m
Length Through Bore 2
17.6 mm
Shaft Locking Type
Clamp On
Number of Locking Screws
2
Coupling Outside Diameter
28.6 mm
Country of Origin (subject to change)
United States
