| Shaft Locking Type - Couplings | 1 Piece Set Screw |
| Item | Motion Control Coupling |
| System of Measurement | Metric |
| Bore Dia. | 8mm x 6mm |
| Material - Couplings | Stainless Steel |
| Outside Dia. | 28.6 mm |
| Overall Length | 38.1 mm |
| Finish | Bright |
| Length through Bore | 17.02 mm |
| Max. Angular Misalignment | 3 Degrees |
| Size | PSMR29 |
| Outside Dia. (mm) | 28.6 mm |
| Min. Bore (mm) | 6 |
| Max. Axial Misalignment (In.) | +/-0.01 |
| Max. RPM | 6,000 RPM |
| Max. Temp. Range (F) | 350 Degrees |
| Setscrew Location | 2 (120 Degrees ) |
| Screw Size | M5 |
| Overall Length (In.) | 1.5 |
| Screw Type | Set Screw |
| Max. Temp. | 350 Degrees F |
| Length through Bore (mm) | 17.02 |
| Max. Bore (mm) | 8 mm |
| Torsional Stiffness (Deg./In.-Lbs.) | 0.056 |
| Max. Parallel Misalignment (In.) | 0.015 in |
| Clearance Dia. (mm) | 25.4 |
| Length through Bore (In.) | 0.67 |
| Clearance Dia. (In.) | 1.0 in |
| Rated Torque | 60 in-lb |
| Torque (In.-Lbs.) | 60 |
| Style | 4-Beam Set Screw |
| Item - Motion Control Couplings | Motion Control Coupling |
| Outside Dia. (In.) | 1.125 |
| Material | Stainless Steel |
| Screw Size (mm) | M5 |
| Overall Length (mm) | 38.1 |
| Application | Light-Duty Power Transmission, Servo Motors to Lead Screws |
| Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant |
| Screw Material | Alloy Steel |
| Bore Tolerance | +0.025/-0.000 mm |
| Dynamic Torque Reversing | 1.7 N-m |
| Minimum Operating Temperature | -40 Degrees C |
| Shaft Tolerance | +0.000/-0.013 mm |
| Maximum Speed | 6,000 RPM |
| Included Screws | (4) Set Screw |
| Coupling Outside Diameter | 28.6 mm |
| Screw Thread Size | M5 |
| Maximum Torque | 6.78 N-m |
| Features | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash |
| Length Through Bore 2 | 17.6 mm |
| Length Through Bore 1 | 17.6 mm |
| Fastener Tightening Torque | 4 N-m |
| Torsional Stiffness | 2 N-m/Deg |
| Moment of Inertia | 0.000017643 kgf/m sq |
| Bore Diameter 1 | 8 mm |
| Number of Locking Screws | 4 |
| Bore Diameter 2 | 6 mm |
| Maximum Operating Temperature | 176 Degrees C |
| Dynamic Torque Non-Reversing | 3.39 N-m |
| Screw Material Finish | Black Oxide |
| Shaft Locking Type | Set Screw |
| Axial Motion | 0.25 mm |
| Series | PSMR |
| Bore Type | Round |
| For Environment | Angular Misalignment, Axial Motion, Parallel Misalignment |
| For Misalignment Type | Angular, Axial, Parallel |
| Zero Backlash | Yes |
| Different Bore Sizes | Yes |
| Full Bearing Support Required | Yes |
| Angular Misalignment | 3 Degrees |
| Coupling Material Finish | Bright |
| Parallel Misalignment | 0.38 mm |
| Number of Beams | 4 |
| Coupling Material Grade | 303 |
| Coupling Material | Stainless Steel |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Coupling, 4 Beam Set Screw, 8mmx6mm, RULAND, Mfr# PSMR29-8-6-SS
$127,99
Free shipping will be applied on orders over $50
Motion Control Coupling, Angular Misalignment 3 Degrees , Bore Diameter 1 8 mm, Bore Diameter 2 6 mm, Coupling Material Stainless Steel, Coupling Outside Diameter 28.6 mm, Maximum Speed 6,000 RPM, Maximum Torque 6.78 N-m, Axial Motion 0.25 mm, Overall Length 38.1 mm, Parallel Misalignment 0.38 mm, System of Measurement Metric, Different Bore Sizes Yes, Torsional Stiffness 2 N-m/Deg, Bore Type Round, Shaft Locking Type Set Screw, Number of Beams 4, Length Through Bore 2 17.6 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$127.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.