Shaft Locking Type - Couplings | 1 Piece Set Screw |
Item | Motion Control Coupling |
System of Measurement | Metric |
Bore Dia. | 8mm x 6mm |
Material - Couplings | Aluminum |
Outside Dia. | 31.8 mm |
Overall Length | 38.1 mm |
Finish | Bright |
Size | PSMR32 |
Max. Temp. Range (F) | 225 Degrees |
Rated Torque | 64 in-lb |
Overall Length (mm) | 38.1 |
Min. Bore (mm) | 6 |
Setscrew Location | 2 (120 Degrees ) |
Clearance Dia. (mm) | 31.8 |
Outside Dia. (mm) | 31.8 mm |
Max. Bore (mm) | 8 mm |
Max. Temp. | 225 Degrees F |
Max. Angular Misalignment | 3 Degrees |
Screw Size (mm) | M6 |
Screw Type | Set Screw |
Max. RPM | 6,000 RPM |
Overall Length (In.) | 1.5 |
Length through Bore | 17.02 mm |
Torque (In.-Lbs.) | 64 |
Length through Bore (mm) | 17.02 |
Outside Dia. (In.) | 1.25 |
Material | Aluminum |
Max. Axial Misalignment (In.) | +/-0.01 |
Clearance Dia. (In.) | 1.25 in |
Max. Parallel Misalignment (In.) | 0.015 in |
Screw Size | M6 |
Torsional Stiffness (Deg./In.-Lbs.) | 0.06 |
Style | 4-Beam Set Screw |
Length through Bore (In.) | 0.67 |
Item - Motion Control Couplings | Motion Control Coupling |
Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant |
Application | Light-Duty Power Transmission, Servo Motors to Lead Screws |
Bore Tolerance | +0.025/-0.000 mm |
Screw Material | Alloy Steel |
Screw Thread Size | M6 |
Minimum Operating Temperature | -40 Degrees C |
Parallel Misalignment | 0.38 mm |
Length Through Bore 1 | 17.6 mm |
Dynamic Torque Non-Reversing | 3.62 N-m |
Shaft Locking Type | Set Screw |
Maximum Torque | 7.23 N-m |
Included Screws | (4) Set Screw |
Shaft Tolerance | +0.000/-0.013 mm |
Coupling Outside Diameter | 31.8 mm |
For Misalignment Type | Angular, Axial, Parallel |
Different Bore Sizes | Yes |
Maximum Operating Temperature | 107 Degrees C |
Number of Locking Screws | 4 |
Maximum Speed | 6,000 RPM |
Coupling Material | Aluminum |
Full Bearing Support Required | Yes |
Series | PSMR |
Number of Beams | 4 |
Coupling Material Finish | Bright |
Bore Diameter 1 | 8 mm |
Dynamic Torque Reversing | 1.81 N-m |
Axial Motion | 0.25 mm |
Angular Misalignment | 3 Degrees |
Bore Type | Round |
Fastener Tightening Torque | 7.2 N-m |
Features | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash |
Bore Diameter 2 | 6 mm |
Torsional Stiffness | 1.89 N-m/Deg |
For Environment | Angular Misalignment, Axial Motion, Parallel Misalignment |
Length Through Bore 2 | 17.6 mm |
Moment of Inertia | 0.000009948 kgf/m sq |
Zero Backlash | Yes |
Screw Material Finish | Black Oxide |
Coupling Material Grade | 7075 |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Coupling, 4 Beam Set Screw, 8mmx6mm, RULAND, Mfr# PSMR32-8-6-A
$68,99
Free shipping will be applied on orders over $50
Motion Control Coupling, Angular Misalignment 3 Degrees , Bore Diameter 1 8 mm, Bore Diameter 2 6 mm, Coupling Material Aluminum, Coupling Outside Diameter 31.8 mm, Maximum Speed 6,000 RPM, Maximum Torque 7.23 N-m, Axial Motion 0.25 mm, Overall Length 38.1 mm, Parallel Misalignment 0.38 mm, System of Measurement Metric, Different Bore Sizes Yes, Torsional Stiffness 1.89 N-m/Deg, Bore Type Round, Shaft Locking Type Set Screw, Number of Beams 4, Length Through Bore 2 17.6 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$68.99
You must be logged in to post a review.
Reviews
There are no reviews yet.