Item | Motion Control Coupling |
Shaft Locking Type - Couplings | 1 Piece Set Screw |
System of Measurement | Inch |
Bore Dia. | 5/32 in x 5/32 in |
Material - Couplings | Aluminum |
Outside Dia. | 0.75 in |
Overall Length | 29/32 in |
Finish | Bright |
Torsional Stiffness (Deg./In.-Lbs.) | 0.26 |
Max. Parallel Misalignment (In.) | 0.008 in |
Size | PSR12 |
Length through Bore (In.) | 0.386 |
Screw Size (mm) | M4 |
Length through Bore | 0.386 in |
Length through Bore (mm) | 9.8 |
Clearance Dia. (mm) | 22.2 |
Screw Size | M4 |
Max. Angular Misalignment | 3 Degrees |
Material | Aluminum |
Outside Dia. (In.) | 0.750 in |
Max. Temp. Range (F) | 225 Degrees |
Max. Axial Misalignment (In.) | +/-0.005 |
Setscrew Location | 2 (120 Degrees ) |
Outside Dia. (mm) | 19.1 |
Screw Type | Set Screw |
Max. Bore (In.) | 0.156 in |
Overall Length (In.) | 0.9 |
Max. RPM | 6,000 RPM |
Overall Length (mm) | 22.9 |
Item - Motion Control Couplings | Motion Control Coupling |
Style | 4-Beam Set Screw |
Rated Torque | 17 in-lb |
Min. Bore (In.) | 0.156 in |
Max. Temp. | 225 Degrees F |
Torque (In.-Lbs.) | 17 |
Clearance Dia. (In.) | 0.875 in |
Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant |
Application | Light-Duty Power Transmission, Servo Motors to Lead Screws |
Bore Tolerance | +0.001/-0.000 in |
Screw Material | Alloy Steel |
Full Bearing Support Required | Yes |
For Misalignment Type | Angular, Axial, Parallel |
Maximum Bore Diameter | 5/32 in |
Axial Motion | 0.005 in |
Coupling Outside Diameter | 3/4 in |
Maximum Operating Temperature | 225 Degrees F |
Zero Backlash | Yes |
For Environment | Angular Misalignment, Axial Motion, Parallel Misalignment |
Different Bore Sizes | No |
Length Through Bore 1 | 0.4 in |
Angular Misalignment | 3 Degrees |
Coupling Material Grade | 7075 |
Coupling Material Finish | Bright |
Screw Material Finish | Black Oxide |
Screw Thread Size | M4 |
Maximum Speed | 6,000 RPM |
Shaft Tolerance | +0.0000/-0.0005 in |
Included Screws | (2) Set Screw |
Dynamic Torque Reversing | 4.25 lb-in |
Bore Diameter 1 | 5/32 in |
Dynamic Torque Non-Reversing | 8.5 lb-in |
Fastener Tightening Torque | 1.76 N-m |
Parallel Misalignment | 0.008 in |
Bore Diameter 2 | 5/32 in |
Coupling Material | Aluminum |
Maximum Torque | 17 in-lb |
Features | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash |
Bore Type | Round |
Moment of Inertia | 0.0025 lb-in sq |
Length Through Bore 2 | 0.4 in |
Shaft Locking Type | Set Screw |
Series | PSR |
Torsional Stiffness | 3.85 in-lb/Deg |
Minimum Bore Diameter | 5/32 in |
Minimum Operating Temperature | -40 Degrees F |
Number of Beams | 4 |
Number of Locking Screws | 2 |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Coupling, 4 Beam Set Screw, 5/32inx 5/32in, RULAND, Mfr# PSR12-2.5-2.5-A
$32,99
Free shipping will be applied on orders over $50
Motion Control Coupling, Angular Misalignment 3 Degrees , Bore Diameter 1 5/32 in, Bore Diameter 2 5/32 in, Coupling Material Aluminum, Coupling Outside Diameter 3/4 in, Maximum Speed 6,000 RPM, Maximum Torque 17 in-lb, Axial Motion 0.005 in, Overall Length 29/32 in, Parallel Misalignment 0.008 in, System of Measurement Inch, Different Bore Sizes No, Torsional Stiffness 3.85 in-lb/Deg, Bore Type Round, Shaft Locking Type Set Screw, Number of Beams 4, Length Through Bore 2 0.4 in
9999 in stock
Must order in multiples of 1
Subtotal:
$32.99
You must be logged in to post a review.
Reviews
There are no reviews yet.