| Item | Motor Management System |
| Current Range | 1.35 to 27A |
| Control Voltage | 24V DC |
| Width | 3.58 in |
| Interface | Modbus |
| Operating Voltage | 690V AC |
| Height | 2.4 in |
| Depth | 4.82 in |
| Standards | CSA C22.2 No 14, EN 60947-4-1, IACSE10, IEC 60947-4-1, nABS, nATEX, nBV, nC-tick, nCCC, nCSA, nDNV, nEAC, nGL, nKERI, nLROS, nNOM, nRINA, nUL, RMRoS, UL 508 |
| For Use With | Short Circuit Protection And A Contactor |
| Associated Fuse Rating | 4 A gG output || 0.5 A gG control circuit |
| Electromagnetic Compatibility | electrostatic discharge, 3, 8 kV air, 6 kV contact, conforming to EN/IEC 61000-4-2 || control circuit: surges (common mode), 1 kV, conforming to EN/IEC 61000-4-5 || communication: surges (common mode), 2 kV, conforming to EN/IEC 61000-4-5 || relay outputs and supply: surges (serial mode), 2 kV, conforming to EN/IEC 61000-4-5 || relay outputs and supply: surges (common mode), 4 kV, conforming to EN/IEC 61000-4-5 || radiated RF fields, 3, 10 V/m, conforming to EN/IEC 61000-4-3 || fast transients immunity test (other circuits), level 3, 2 kV, conforming to EN/IEC 61000-4-4 || fast transients immunity test (on supply and relay outputs), level 4, 4 kV, conforming to EN/IEC 61000-4-4 || voltage dips and interruptions immunity test, 70 %, 500 ms, conforming to EN/IEC 61000-4-11 || conducted RF disturbances, 10 V, conforming to EN/IEC 61000-4-6 || temperature sensor: surges (serial mode), 0.5 kV, conforming to EN/IEC 61000-4-5 || temperature sensor: surges (common mode), 1 kV, conforming to EN/IEC 61000-4-5 || control circuit: surges (serial mode), 1 kV, conforming to EN/IEC 61000-4-5 |
| Measurement Accuracy | 5 to 15 % earth fault current internal measurement || 1 % voltage 100 to 830 V) || 3 % power factor || 5 % earth fault current external measurement || +/- 30 min/year internal clock || 0,02 Temperature || 1 % current || 5 % active and reactive power |
| Bus Type | Modbus 2-wire RS 485 1 to 247 1.2 to 19.2 kbit/s, RJ45 2 shielded twisted pairs || Modbus 2-wire RS 485 1 to 247 1.2 to 19.2 kbit/s, terminal block 2 shielded twisted pairs |
| Web Services | web server |
| Maximum Operating Rate | 1800 cyc/h |
| Mechanical Robustness | vibrations mounted on symmetrical rail1 Gn, 5 to 300 Hz EN/IEC 60068-2-6 || vibrations plate mounted4 Gn, 5 to 300 Hz EN/IEC 60068-2-6 || shocks half sine wave acceleration15 Gn for 11 ms EN/IEC 60068-2-27 |
| [Us] Rated Supply Voltage | 24 V DC |
| Protection Type | thermal overload protection || locked rotor || earth-leakage protection || thermal protection || phase failure || phase unbalance || reverse polarity protection || overload (long time) || overload || power factor variation || load fluctuation |
| Short-Circuit Withstand | 100 kA conforming to EN/IEC 60947-4-1 |
| Ambient Air Temperature For Operation | -20-60°C |
| Product Certifications | RMRoS || CSA || NOM || BV || KERI || EAC || LROS (Lloyds register of shipping) || ATEX || ABS || C-tick || RINA || CCC || UL || GL || DNV |
| Current State 0 Guaranteed | logic input < 5 V <= 15 mA 5 ms |
| Connections - Terminals | control circuit connector 1 0.25-2.5 mm? AWG 24 to AWG 14)flexible with cable end || control circuit connector 1 0.2-2.5 mm? AWG 24 to AWG 14)flexible without cable end || control circuit connector 1 0.25-2.5 mm? AWG 24 to AWG 14)flexible without cable end || control circuit connector 1 0.2-2.5 mm? AWG 24 to AWG 14)solid without cable end || control circuit connector 2 0.2-1 mm? AWG 24 to AWG 14)flexible with cable end || control circuit connector 2 0.2-1.5 mm? AWG 24 to AWG 14)flexible without cable end || control circuit connector 2 0.5-1.5 mm? AWG 24 to AWG 14)flexible without cable end || control circuit connector 2 0.2-1 mm? AWG 24 to AWG 14)solid without cable end |
| Permissible Power | 480 VA AC-15), Ie = 2 A, 500000 cycles output) || 30 W DC-13), Ie = 1.25 A, 500000 cycles output) |
| Input Current | 7 mA |
| Compatibility Code | LTMR |
| Load Current | 5 A 250 V AC logic output || 5 A 30 V DC logic output |
| Device Application | equipment monitoring and control |
| Metering Type | temperature || average current Iavg || earth-fault current || imbalance current || phase current I1, I2, I3 RMS |
| Contacts Type And Composition | 1 NO + 1 NC fault signal || 3 NO |
| Ambient Air Temperature For Storage | -40-80°C |
| Device Short Name | LTMR |
| Communication Port Protocol | Modbus |
| Range | TeSys |
| [Uimp] Rated Impulse Withstand Voltage | 6 kV current or voltage measurement circuit EN/IEC 60947-4-1 || 0.8 kV communication circuit EN/IEC 60947-4-1 || 0.8 kV supply, inputs and outputs EN/IEC 60947-4-1 |
| Supply Voltage Limits | 20.4-26.24 V DC |
| [Ui] Rated Insulation Voltage | 690 V EN/IEC 60947-1 || 690 V CSA C22.2 No 14 || 690 V UL 508 |
| Overvoltage Category | III |
| Protective Treatment | 12 x 24 hour cycles EN/IEC 60068-2-30 || 48 h EN/IEC 60070-2-11 || TH EN/IEC 60068 |
| Connection Pitch | 5.08 mm |
| Fire Resistance | 650°C EN/IEC 60695-2-12 || 960°C UL 94 |
| Pollution Degree | 3 |
| Product Name | TeSys T |
| Operating Altitude | <= 6561.68 ft (2000 m) without derating |
| Network And Machine Diagnosis Type | starting current and time || running hours counter/operating time || remaining operating time before overload tripping || trip history information || trip context information || event recording || waiting time after overload tripping || phase fault and earth fault trip counters || fault recording || motor control command recording |
| Current Consumption | 56 to 127 mA |
| Product Or Component Type | motor controller |
| Maximum Operating Frequency | 2 Hz |
| Current State 1 Guaranteed | logic input < 15 V 2 to 15 mA 15 ms |
| Logic Input Number | 6 |
| Ip Degree Of Protection | IP20 |
| Tightening Torque | control circuit 0.5-0.6 N.m flat 3 mm |
| Measurement Current | 1.35-27 A |
| Number of Normally Open Contacts | 4 |
| Overall Width | 3.58 in |
| Compatible with Series | TeSys T |
| Minimum Current Rating | 1.35 A |
| Maximum Current Rating | 27 A |
| Overall Depth | 4.82 in |
| Number of Contacts Included | 5 |
| Overall Height | 2.4 in |
| Number of Normally Closed Contacts | 1 |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Motor Manager, Modbus, 24VDC, 1.35-27A, SCHNEIDER ELECTRIC, Mfr# LTMR27MBD
$1044,99
Free shipping will be applied on orders over $50
Motor Management System, Number of Normally Open Contacts 4, Number of Normally Closed Contacts 1, Number of Contacts Included 5, Operating Voltage 690V AC, Control Voltage 24V DC, Interface Modbus, Compatible with Series TeSys T, Overall Width 3.58 in, Standards CSA C22.2 No 14, EN 60947-4-1, IACSE10, IEC 60947-4-1, nABS, nATEX, nBV, nC-tick, nCCC, nCSA, nDNV, nEAC, nGL, nKERI, nLROS, nNOM, nRINA, nUL, RMRoS, UL 508, Overall Height 2.4 in, Overall Depth 4.82 in, Maximum Current Rating 27 A
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.