| Promotion Restriction | Not eligible for promotion |
| Item | Belt Drive Motor |
| Motor Design | Split-Phase |
| Motor Enclosure Design | Open Dripproof |
| HP | 1/4, 1/8 |
| No. of Speeds | 2 |
| RPM Range | 1,701-1,800 |
| Nameplate RPM | 1,725/1,140 |
| Voltage | 115V AC |
| Frame | 56Z |
| Motor Mounting Type | Cradle Base |
| Shaft Dia. | 1/2 in |
| Motor Thermal Protection | Auto |
| Motor Service Factor | 1.35 |
| Voltage Compatibility | 115/208-230V AC, 115/230V AC, 115V AC, 120/240V AC, 120V AC |
| Phase | Single |
| Motor Application | HVAC/R |
| Motor Sub Application | Belt Drive Fan/Blower |
| Max. Ambient Temp. | 104 Degrees F |
| Duty | Continuous |
| Motor Frame Material | Steel |
| Motor Shaft Rotation | CW/CCW |
| Motor Shaft Design | Flat |
| Resilient Ring Dia. | 2 1/2 in |
| Standards | CSA Certified, UL Recognized |
| Length Less Shaft | 8 15/16 in |
| Overall Length | 10 7/16 in |
| Full Load Amps | 5.9/3.8 A |
| Body Dia. | 5 5/8 in |
| Mounting Stud Pattern | 3-5/8 in x 3-5/8 in |
| Shaft Length | 1 1/2 in |
| Ring to Ring Center | 8 1/16 in |
| Ins. Class | B |
| Motor Bearings | Ball |
| Includes | 1/2 to 5/8 in Diameter Shaft Bushing, 3/16 x 3/16 x 1 1/4 in Shaft Key |
| Motor Mounting Position | All Angle |
| Frame Material | Steel |
| Hz | 60 Hz |
| Nominal Efficiency | 53.9 % |
| Duty Cycle | Continuous |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Split-Phase Belt Drive Motor, 1/4, 1/8 HP, 56Z Frame, 115V AC Voltage, 1,725/1,140 Nameplate RPM, DAYTON, Mfr# 6K425
$262,99
Free shipping will be applied on orders over $50
Belt Drive Motor, Single Phase, Motor Design Split-Phase, 1/4, 1/8 HP, Nameplate RPM 1,725/1,140, No. of Speeds 2, Voltage 115V AC, 5.9/3.8 A Full Load Amps, 56Z Frame, 60 Hz Hz, Motor Service Factor 1.35, Motor Thermal Protection Auto, Ins. Class B, Max. Ambient Temp. 104 Degrees F, Duty Cycle Continuous, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Open Dripproof, Motor Mounting Type Cradle Base, Motor Mounting Position All Angle, Motor Frame Material Steel, Shaft Dia. 1/2 in
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.