| Dash Number | 210 |
| System of Measurement | Inch |
| Cross Section Shape | Round |
| O-Ring Material | PTFE |
| O-Ring Material Compatibility | Acetone, Anhydrous Ammonia, Animal Fats, Bleach, Carbon Dioxide, Detergents, Diesel Oil, Ethanol, Fatty Acids, Gasoline, Hydraulic Oils (Petroleum), Hydrochloric Acid (37%), Kerosene, Liquid Propane Gas, Lubricating Oils (Petroleum), Methanol, Mineral Oil, Natural Gas, Nitrogen, Silicone Grease, Steam, Sulfuric Acid (Dilute), Toluene, Vegetable Oils, Water |
| Durometer | 55 Shore D |
| Color | White |
| Nominal Inside Dia. | 3/4 in |
| Actual Inside Dia. | 0.734 in |
| Nominal Outside Dia. | 1 in |
| Temp. Range | -300 Degrees to 500 Degrees F |
| Nominal Width | 1/8 in |
| X-Ray Dectectable | No |
| Actual Width | 0.139 in |
| FDA Approved | Yes |
| Item | O-Ring |
| Actual Outside Dia. | 1.012 in |
| Metal Detectable | No |
| Durometer (Hardness) Rating | Very Hard |
| X-Ray Detectable | No |
| Type | O-Ring |
| Product Type | O-Ring |
| Package Quantity | 10 |
| Material | PTFE |
| Country of Origin (subject to change) | Italy |
O-Ring, Dash 210, PTFE, 0.13 In., PK10, EnjoyTool select, Mfr# 1RGH5
$4.61
Free shipping will be applied on orders over $50
O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material PTFE, Durometer (Hardness) Rating Very Hard, Nominal Inside Dia. 3/4 in, Nominal Width 1/8 in, Actual Inside Dia. 0.734 in, Actual Width 0.139 in, Dash Number 210, Color White, Durometer 55 Shore D, Nominal Outside Dia. 1 in, Actual Outside Dia. 1.012 in, Temp. Range -300 Degrees to 500 Degrees F, FDA Approved Yes, Package Quantity 10
9999 in stock
Must order in multiples of 1
Subtotal:
$4.61
You must be logged in to post a review.
Reviews
There are no reviews yet.