| Flow Rate Output Control | Fixed |
| Reproducibility | +/-3.0% |
| Phase | Single |
| Number of Feeds | 1 |
| Turn Down Ratio | Not Applicable |
| Tubing Material | Neoprene |
| Standards | CE, ETL, NSF 50, NSF/ANSI 61 |
| Item | Peristalic Dosing Pump |
| Cord Length | 6 ft |
| Manufacturers Warranty Length | 2 yr |
| Flow Rate (Maximum) | 30 gpd |
| Overall Height | 8.2 in |
| Intake Connection Size | 1/4 in |
| Media Temperature (Minimum) | Not Applicable |
| Priming | Self-Priming |
| Duty Cycle | Intermittent |
| Ambient Temperature (Minimum) | Not Applicable |
| Flow Rate (Minimum) | 30 gpd |
| Pressure (Maximum) | 80 psi |
| Nameplate Voltage | 230V AC |
| Stroke Rate (Maximum) | 30 stroke/min |
| Housing Material | ABS |
| Intake Connection Type | Tube |
| Viscosity (Maximum) | 300 cps |
| Media Temperature (Maximum) | 104 Degrees F |
| Chemical Compatibility | Ammonium Hydroxide, Calcium Carbonate, Hydrochloric Acid 10%, Phosphoric Acid 40%, Phosphoric Acid 50%, Potassium Hydroxide 50%, Sodium Hydroxide 20%, Sodium Hydroxide 50%, Sodium Hypochlorite 10%, Sodium Hypochlorite 20%, Sodium Hypochlorite 5%, Sulfuric Acid 10%, Sulfuric Acid 20%, Sulfuric Acid 30%, Water |
| Seal Material | Not Applicable |
| Motor Speed (Maximum) | 30 RPM |
| Motor Mounting Type | Horizontal |
| Seal Type | Not Applicable |
| Motor Type | Shaded Pole |
| Overall Width | 9.8 in |
| Discharge Connection Type | Tube |
| Overall Length | 10.9 in |
| Frequency | 60 Hz |
| Discharge Connection Size | 1/4 in |
| Motor Enclosure | Not Applicable |
| Horsepower (Maximum) | 1/6 hp |
| Fitting Material | PVC |
| Ambient Temperature (Maximum) | 104 Degrees F |
| Degassing Valve Included | Yes |
| Motor Thermal Protection | Auto |
| Electrical Connection Type | Plug-In |
| Head Material | PVC |
| Control Programs | Manual Control |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Peristalic Dosing Pump, 80 psi, 1/6 hp, PULSATRON, Mfr# XP030HFHX
$376,99
Free shipping will be applied on orders over $50
Peristalic Dosing Pump, Chemical Compatibility Ammonium Hydroxide, Calcium Carbonate, Hydrochloric Acid 10 Percent, Phosphoric Acid 40 Percent, Phosphoric Acid 50 Percent, Potassium Hydroxide 50 Percent, Sodium Hydroxide 20 Percent, Sodium Hydroxide 50 Percent, Sodium Hypochlorite 10 Percent, Sodium Hypochlorite 20 Percent, Sodium Hypochlorite 5 Percent, Sulfuric Acid 10 Percent, Sulfuric Acid 20 Percent, Sulfuric Acid 30 Percent, Water, Control Programs Manual Control
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.